I am looking for exact dimensions of two stickers that go under the seat for reproduction purposes. Would someone be able to take exact measurements of the vehicle emissions sticker and the ATTENTION sticker below the paint code.

I also require a direct, overhead photo of the emission sticker which shows all the wording legibly.

Mine are long gone unfortunately.

If you have a U.S. model 1985 K100RS, I could use your help.

Thanks,
Tom

My third try but this time I will only send the dimensions while I work on loading the picture!!!
Dimensions are in cms.
Attention: 3 cm High by 10 cm Wide
Emission: 8.7 cm High by 12.5 cm Wide

If you need stickers, this is the guy to contact:

https://www.heritagestickers.eu/cat/product-category/k-series/

"Stickersman" is a member here.  I've done business with him, and can testify that his stuff is OEM quality.

Point-Seven-five wrote:If you need stickers, this is the guy to contact:

https://www.heritagestickers.eu/cat/product-category/k-series/

"Stickersman" is a member here.  I've done business with him, and can testify that his stuff is OEM quality.

He's the guy doing the stickers for me provided I can get him the information I am after in my post. He doesn't make the ones I am after. Maybe he will offer them for sale after this,  provided I can get the details.

Shep wrote:

Thank you so much. Very much appreciated. I'll be forwarding this off to Gian at Heritage Stickers Tuesday morning. Again, thank you.

Tom

Shep wrote:

Shep,

       What is the other decal just visible to the right?

Shep wrote:My third try but this time I will only send the dimensions while I work on loading the picture!!!
Dimensions are in cms.
Attention: 3 cm High by 10 cm Wide
Emission: 8.7 cm High by 12.5 cm Wide

Shep,

       I’ve taken your measurements, cut pieces of paper and placed them on my tail fairing in roughly the same location as my originals. Looks good!

I should have added the following information for the bike (F0040448) that the label came from.
To the best of my knowledge the bike was purchased by an individual in the Kootenays and ridden for three years, from 1985 to 1988. It then was stored from 1988 until 2012 when it was then headed for the crusher. It was purchased by a local motorcycle enthusiast thinking about rebuilding it. He decided not to rebuild it so I purchased it in 2013 as a donor bike for my 1987 K100 RS. The bike had remained in the Kootenays until I purchased it.
Interesting is that I don't see the emission sticker on my 1987 K100RS. So that means different emission performance specifications for the US and Canada at that time.

I will take another picture tomorrow showing all the decals on the tail piece.

Actually I did take a picture showing the information decal to the right.
It is the tire specification decal for the bike.
So the only other decals on the tail piece besides the two shown in the photograph below are the small paint code decal and the Attention decal.

Shep wrote:Actually I did take a picture showing the information decal to the right.
It is the tire specification decal for the bike.
So the only other decals on the tail piece besides the two shown in the photograph below are the small paint code decal and the Attention decal.

The decal for the tire specs was included in the Heritage Stickers set. My original was located on the removable lid over the tool box so that's where I stuck the new one on too.

As regards the emission sticker not being on your '87RS, you're probably correct about the reason.

Thanks again for all your help.