Hi, 

I am going to restore my 1986 K100RS. It needs a new clutch, and the output shaft seems need replacing or repairing as well. So i want to get some information from here. 

Thanks

Welcome Billy. 

You should be able to find all the information and help you'll need here.

MikeP wrote:Welcome Billy. 

You should be able to find all the information and help you'll need here.

Thanks does it mean i can post now?

My urgent problem is that, according to motorworks' data check, my bike should have originally fitted with 6 rivet output shaft assembly. Can I upgrade to 12 rivet? What modification do i need?

Ask in the relevant section. Have a quick search first, you'll probably find many of you questions have been answered over the years.

hi billy ...welcome to the forum


the second question should be posted in the  
 https://www.k100-forum.com/f10-engine-and-transmission



have fun

Find a used one from a K1100. No mods required.

Hoi Billy

Welcome and good luck with your repair    

 

Hi Billy welcome to the forum mate.

BIG D

Hi Billy welcome to the forum, this is the best place to get advice, in English language that is.

You say you need a new clutch, how many Kms has the bike? Hong Kong is probably hard on clutches

but they are usually reliable for 2 - 3 hundred thousand Kms. Give this information and the experts here will advise.

The 6 rivet output shaft is only a problem if it is showing signs ie. noisy. Are you sure it needs doing?

Welcome Billy !
Good luck on the repair.

Hi Billy,
Good to have you with us and as the guys say pop a post in the relevant technical section and you are sure to get responses.
Regards,
K-BIKE