BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   K100 additional electronics box  Empty K100 additional electronics box Thu May 13, 2021 7:07 am

snowy

snowy
New member
New member
Some advice please, i have an additional box of electronics located in the tail tidy on my K100 trike, has the same sort of connector as the under seat/tool kit holder, can i remove without causing many and varied electrical problems with the trike.
After it has passed it's MOT tomorrow Friday 14/5/21 i will be looking to get it resprayed, been promising to do that for 4 years now.
Any and all advice much appreciated, Snowy

    

TacKler

TacKler
Life time member
Life time member
Do you have ABS fitted because it could be the control box.  That's where it is on mine.


__________________________________________________
Red 1991 K75S
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
TacKler wrote:Do you have ABS fitted because it could be the control box.  That's where it is on mine.

+1 ABS brain.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

4Back to top Go down   K100 additional electronics box  Empty additional 'brain' in tail tidy Fri May 14, 2021 1:51 pm

snowy

snowy
New member
New member
Hi all, thanks for that, no abs fitted so i am going to assume it is redundant and can be removed.
Will follow the harness then individual cables back into the main loom checking against the wiring diagram.
cheers and beers
Snowy

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum