Working on the bike yesterday (8V K100RT).  I adjusted the forks through the triple clamps was all I did.

Took it out for a test ride, at the first corner I hit the right blinker button, there was a bit of confusion on the dash.  Now only my right blinker works, both work on the hazards so the bulbs are OK, but no response from pressing the left button.

I guess the first thing is check the switch, anything else other than the starter motor (its been cleaned out recently)

Al

I had sort of a similar problem a while back when my starter relay fried itself. Replaced the relay.... all good. Blinkers back to normal....

Check fuse 7 using a meter and the starter brushes can cause the same problem.

Was the fuse, thank you.

Al