BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Leads & Plugs K1100 Empty Leads & Plugs K1100 Sat Nov 08, 2014 8:23 am

mike d

avatar
Life time member
Life time member
Hi All,

There has been previous discussion about the K100 OEM resistive HT leads, and associated non resistor fitted plugs and how resistor fitted plugs should be used with replacement HT leads/caps which do not have the built in resistance.

So.......................

Does anyone know then why the K1100 (which has a 6K ohm lead/cap) uses a Bosch XR7LDC, where the 'R' denotes the interference suppression resistor.

In a similar fashion, on the Motorworks site the XR5DC is called up for the K100RS 16v and K1.

Mike

    

2Back to top Go down   Leads & Plugs K1100 Empty Re: Leads & Plugs K1100 Sat Nov 08, 2014 9:53 am

Rick G

Rick G
admin
admin
The impedance of the HT winding in the coil is higher and the load must be matched to the source to get the best power output.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Leads & Plugs K1100 Empty Re: Leads & Plugs K1100 Sat Nov 08, 2014 11:34 am

mike d

avatar
Life time member
Life time member
Hi Rick,

Makes obvious sense - thanks!

Mike

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum