1
k75 s bars to c bars Wed Oct 16, 2013 4:46 pm
jings
active member
I,ve just fitted c bars to my k75s is there a handle bar pad that fits the c bars as the s bar pad doesn't fit
Message [Page 1 of 1]
1
active member
2 Re: k75 s bars to c bars Wed Oct 16, 2013 4:55 pm
Corkboy
Life time member
Yes there is.
I converted my RS bars to C bars and ordered the replacement pad from motorbins/motorworks (cant remember which) secondhand. I can't remember how much, but it is available. It is the one that has the ignition below the switches, as opposed to alongside them, like the RS.
Give them a shout and they should sort you out.
I converted my RS bars to C bars and ordered the replacement pad from motorbins/motorworks (cant remember which) secondhand. I can't remember how much, but it is available. It is the one that has the ignition below the switches, as opposed to alongside them, like the RS.
Give them a shout and they should sort you out.
__________________________________________________
Regards,
Corkboy '87 K100RS SE (The black one - one of the two bikes I'm sorry I sold)
'87 K100RS 0140995 (Gone)
'97 K1100LT 0188024 (Gone)
'08 K1200GT Wedge - but still a K
'08 Transalp 700
3 Re: k75 s bars to c bars Wed Oct 16, 2013 5:29 pm
sidecar paul
Life time member
Is this the type of pad you need?
If it is, it's surplus to my requirements, so I'd be happy to part with it. (I bought a set of locks off e-bay, just for the petrol tank cap, really, and the ignition lock came attached to the pad.)
Even the brackets are rust free!!
Paul.
If it is, it's surplus to my requirements, so I'd be happy to part with it. (I bought a set of locks off e-bay, just for the petrol tank cap, really, and the ignition lock came attached to the pad.)
Even the brackets are rust free!!
Paul.
__________________________________________________
'84 K100RS (0014643) (owned since '85), 86 K100RS (0018891) with Martello sidecar (built as an outfit in '88),
'51 Vincent (since '67),'72 Montesa Cota (from new), '87 Honda RS125R NF4 (bought 2015)
....No CARS never ever!
4 Re: k75 s bars to c bars Wed Oct 16, 2013 5:33 pm
duck
Life time member
There's two versions of the square dash pad: one without a hole for a Powerlet outlet and one with. The latter is handy for electrifying your tank bag.
__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
5 Re: k75 s bars to c bars Thu Oct 17, 2013 4:33 pm
jings
active member
thanks for the reply yes that looks like what I need ..paul ive sent you a pm
6 Re: k75 s bars to c bars Thu Nov 07, 2013 4:58 pm
need2boat
active member
Hey Jings.
For what it's The pad will fit back on with a little modification to the end where it curves up the bars. You need remove some foam so the bend a little easier and fit under the cables. I tend to like the look of the s pad better.
The pics are great but you get the idea.
Joe
" />
" />
For what it's The pad will fit back on with a little modification to the end where it curves up the bars. You need remove some foam so the bend a little easier and fit under the cables. I tend to like the look of the s pad better.
The pics are great but you get the idea.
Joe
" />" /> Message [Page 1 of 1]
K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » k75 s bars to c bars
Similar topics
Permissions in this forum:
You cannot reply to topics in this forum
|
|
|
