I am looking for the wider engine bars for the K1100LT.

It currently has the narrower ones on it but I want to mount lights on them and need the wider ones.

Chrome or black doesn't really worry me.

Also looking for the rear bars and mounting fittings.

92KK 84WW Olaf wrote:
Also looking for the rear bars and mounting fittings.

 Were they Police issue only?? Will they work with Standard luggage?

Alex McCarthy n Oz is yer man for those answers.

88 wrote: Will they work with Standard luggage?

Fifth Picture.

https://www.k100-forum.com/t13641-k-bike-ratbike-thread-i-ll-start#161090

To mount the rear bars for a K1100LT you'd need the early LT peg plates. (Also used on K100RS4V)  They're basically the same as the 2V peg plates except they are stepped out in the rear to clear the "hump" at the end of the paralever swing arm.

The bottoms of the rear bars mount to one of the three peg plate bolts and the rear peg hole.  (Police bikes don't need rear pegs because they're single seat.)

Here's an example of the early K11LT/K100RS4V peg plate on an early 93 K1100LT that I have ( and was out riding today )



In the parts fiche, the K1100LT rear bars (46712316215 & 6) have an end date of 8/92.  I'm pretty sure that's because it's when BMW switched to the newer style peg plates that mount to the rubber mounted bracket under the battery tray that spans the top of the transmission.