1 Help with ht lead I.D Sat Oct 05, 2013 5:18 pm
colinijohnson
Silver member
Hi- I switched ht leads to realmengineering ones. Could someone please help explain which plug lead goes from which plug to which coil socket. I'm checking because I may have mixed them up!
The bike was running rich on 2 plugs and I've just had to replace the Coil that serves cyl 2&3 with a good used(orAnge) one. Bike now pulls great at high revs, but needs warming up from cold or it stalls. I'm gonna renew plugs, check t p s switch and Ecu connections. All obvious other bits have been done over last 2 years...temp switch, breather hose , cleaned connections, tb,s balanced. The only other thing is maybe the battery's crap - even tho only 2 years old.
Any other thoughts would be gratefully received
Colin
The bike was running rich on 2 plugs and I've just had to replace the Coil that serves cyl 2&3 with a good used(orAnge) one. Bike now pulls great at high revs, but needs warming up from cold or it stalls. I'm gonna renew plugs, check t p s switch and Ecu connections. All obvious other bits have been done over last 2 years...temp switch, breather hose , cleaned connections, tb,s balanced. The only other thing is maybe the battery's crap - even tho only 2 years old.
Any other thoughts would be gratefully received
Colin