BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Electrical » Spark plug lead test

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Spark plug lead test Empty Spark plug lead test Tue Aug 31, 2010 10:32 am

8675k

avatar
active member
active member
What is the proper test for checking the spark plug leads??
I have no continuity from end to end which I understand is correct?

    

2Back to top Go down   Spark plug lead test Empty Re: Spark plug lead test Tue Aug 31, 2010 12:43 pm

phil_mars

avatar
Life time member
Life time member
A bit of a can of worms here but apparently the K75 leads have a gap in them and therefore measuring continuity will not achieve anything.

Beyond that I can not comment and will leave it to our more knowledgeable Sages.


__________________________________________________
Regards,
Phil
    

3Back to top Go down   Spark plug lead test Empty Re: Spark plug lead test Wed Sep 01, 2010 6:05 am

K-BIKE

avatar
Life time member
Life time member
In another post you say you have good spark at the plug so that should be OK fuel flooded engine points to continuous injection it should pulse as shown by the video posted by Bert. K75 leads are open circuit end to end.
Regards,
K-BIKE

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Electrical » Spark plug lead test

Permissions in this forum:
You cannot reply to topics in this forum