BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Replacing front screen

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Replacing front screen Empty Replacing front screen Mon Oct 08, 2012 11:32 am

BillOwens

BillOwens
active member
active member
Any ideas how this can be done without dismantling the fairings, I have the new screen and am ready to go but it looks a big job
It's 1984k100RS Replacing front screen 178468


__________________________________________________
1984 BMW K100 RS black,90,000km, 1982 Ducati Pantah 600SL 2,000km since restoration, 1949 Velocette Mac 350, undergoing restoration
http://www.wdmoc.com
    

2Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 08, 2012 11:36 am

92KK 84WW Olaf

avatar
Life time member
Life time member
Is the screen electric? I dont have electric and it come off to clean it by unscrewing the seven screws and no discmantling of the faining.

If it is electric I am sure someone will point you in the right direction.

92KK


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

3Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 08, 2012 12:06 pm

Rick G

Rick G
admin
admin
Thats it Bill 7 screws and 4 on an electric.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

4Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 08, 2012 4:06 pm

Inge K.

Inge K.
VIP
VIP
Remove the inner panel at each side of the screen (four screws).

To get the screen off, it`s usually also needed to loosen the center part.

Then you also need to remove the knee pads (three screws each side) and remove the small plastic bits between knee pads and center part........to get acces to the center part mounting screws.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

5Back to top Go down   Replacing front screen Empty removing screen Mon Oct 15, 2012 10:16 am

BillOwens

BillOwens
active member
active member
Being an RS all I had to do was remove 2 inner panels as Inge suggested, take the six screws out (only three were attached) and slide it out!
New screen is in, i've got to get a new set of screws from the boltman and i'm putting little rubber grommets on them and all should be OK
thanks for the help


__________________________________________________
1984 BMW K100 RS black,90,000km, 1982 Ducati Pantah 600SL 2,000km since restoration, 1949 Velocette Mac 350, undergoing restoration
http://www.wdmoc.com
    

6Back to top Go down   Replacing front screen Empty Re: Replacing front screen Sun Oct 28, 2012 10:28 pm

Biagio

Biagio
active member
active member
BillOwens wrote:Being an RS all I had to do was remove 2 inner panels as Inge suggested, take the six screws out (only three were attached) and slide it out!
New screen is in, i've got to get a new set of screws from the boltman and i'm putting little rubber grommets on them and all should be OK
thanks for the help
Bill,
can i ask you were did you take the screen? I can't find it nowhere.

Thanks

    

7Back to top Go down   Replacing front screen Empty purchase of screen Mon Oct 29, 2012 10:44 am

BillOwens

BillOwens
active member
active member
its a long way from you, but Munich cycles in Perth Australia have the genuine item in stock, cost $320 AU
Hope that helps
Regards Bill Owens


__________________________________________________
1984 BMW K100 RS black,90,000km, 1982 Ducati Pantah 600SL 2,000km since restoration, 1949 Velocette Mac 350, undergoing restoration
http://www.wdmoc.com
    

8Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 29, 2012 11:18 am

Inge K.

Inge K.
VIP
VIP
Also Moto Bins and Motorworks got them,.......a bit expensive....


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

9Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 29, 2012 11:29 am

Rick G

Rick G
admin
admin


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

10Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 29, 2012 12:03 pm

Toto_jp

avatar
Platinum member
Platinum member
BillOwens wrote:its a long way from you, but Munich cycles in Perth Australia have the genuine item in stock, cost $320 AU
Hope that helps
Regards Bill Owens

Bill should of gone to Motorworks new screen, new lip, new lip screws and washers under $250 delivered took 7 days


__________________________________________________
K100 RS 1986
    

11Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 29, 2012 5:36 pm

Biagio

Biagio
active member
active member
Uazzzzzz it's a lot of money!
I will keep mine then. I'll try to polish it a bit...

    

12Back to top Go down   Replacing front screen Empty Re: Replacing front screen Mon Oct 29, 2012 7:26 pm

GerryP

GerryP
Silver member
Silver member
I used jeweller's rouge on mine.

It takes a fair bit of elbow grease and its really messy but my screen came up like new!


__________________________________________________
Safe riding Cool,
Gerry Parnham

K1100LT (1993) in Silk Blue/Cream
http://gerryparnham.com
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Replacing front screen

Permissions in this forum:
You cannot reply to topics in this forum