BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Slider pucks for k bikes Empty Slider pucks for k bikes Tue Oct 09, 2012 9:29 am

chrish8846

avatar
Silver member
Silver member
I know that may be this is a morbid subject but has anyone found a way to fit pucks to their K's in case, you know, they dropped it at speed?

    

2Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Tue Oct 09, 2012 8:05 pm

88

88
Life time member
Life time member
chrish8846 wrote:I know that may be this is a morbid subject but has anyone found a way to fit pucks to their K's in case, you know, they dropped it at speed?

Not quite sure what you mean Chrish, is it something akin to the plastic covered protectors on a Honda ST/pan eoropean?


__________________________________________________
Slider pucks for k bikes Ir-log1188....May contain nuts!Slider pucks for k bikes Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

3Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Tue Oct 09, 2012 8:15 pm

Rick G

Rick G
admin
admin
Not sure what the rest of the world calls them but in Oz they are Oggy Knobs they stick out futher than the fairing and are made of teflon or similar and wear away before the expensive bits like plastic panels. Usually attached to the frame.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

4Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Tue Oct 09, 2012 9:54 pm

chrish8846

avatar
Silver member
Silver member
That's what I'm talking about. I saw some on a pic that I think was on here about a older gay racing a K100 and the bike was leaned WAAAAY over.

    

5Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Wed Oct 10, 2012 3:09 am

robmack

robmack
Life time member
Life time member
Shoganai designed a set of DIY frame sliders for the K100RS over on ADVrider:

http://www.advrider.com/forums/showpost.php?p=18971299&postcount=273

Don't know how well they would work at speed for rider protection but they probably would do an admirable job in a parking lot tipover.


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

6Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Wed Oct 10, 2012 3:13 am

Rick G

Rick G
admin
admin
They would be better than the rubber mounted rolling bars that come off and destroy the fairing.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

7Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Wed Oct 10, 2012 3:27 am

blaKey

avatar
Life time member
Life time member
Yep, good for a tip over in the carpark and maybe slow speed, but won't offer too much bike protection at speed.



Last edited by blakey on Wed Oct 10, 2012 5:00 am; edited 1 time in total (Reason for editing : clarification.)


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

8Back to top Go down   Slider pucks for k bikes Empty Crash bobbins Wed Oct 10, 2012 4:57 am

the.postman

avatar
Life time member
Life time member
robmack wrote:

Don't know how well they would work at speed for rider protection but they probably would do an admirable job in a parking lot tipover.

Crash bobbins
I don't really think they're designed for rider protection, but more for saving engine casings, swing arms and fork legs from grinding away as your pride n joy slides gracefully down the tarmac.


__________________________________________________
1985 K100 RS   104EA49840092        #0081788     SILVERish (Madison) Prod. date 05/12/84
1984 srx 600
1986 cbr1000f/h
    

9Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Wed Oct 10, 2012 7:56 am

chrish8846

avatar
Silver member
Silver member
I really was not thinking about rider protection, but I was thinking about that shiny new paint and body work that I put all the effort into.

    

10Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Wed Oct 10, 2012 5:22 pm

sidecar paul

sidecar paul
Life time member
Life time member
Looking at shoganai's fairing, he should have made his 'crash bobbins' a bit earlier!

Paul.


__________________________________________________
'84 K100RS (0014643) (owned since '85), 86 K100RS (0018891) with Martello sidecar (built as an outfit in '88),
'51 Vincent (since '67),'72 Montesa Cota (from new), '87 Honda RS125R NF4 (bought 2015) 
....No CARS never ever!
    

11Back to top Go down   Slider pucks for k bikes Empty Re: Slider pucks for k bikes Thu Oct 11, 2012 3:43 am

the.postman

avatar
Life time member
Life time member
robmack wrote:Shoganai designed a set of DIY frame sliders for the K100RS over on ADVrider:

http://www.advrider.com/forums/showpost.php?p=18971299&postcount=273

Don't know how well they would work at speed for rider protection but they probably would do an admirable job in a parking lot tipover.

Looking at the distance from bobbin end to engine mount, the force of a weighty k moving at any speed,I think would just rip them out and cause more damage, these thing have to be tight up to something substantial for them to work.
Because of the distance between fairing outer surface and a fixing point substantial enough is so great I can't see them working on an old K series.


__________________________________________________
1985 K100 RS   104EA49840092        #0081788     SILVERish (Madison) Prod. date 05/12/84
1984 srx 600
1986 cbr1000f/h
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum