Small pinhole leaks X 3 in the RT tank in the fuel pump well. Found them after having the tank repainted and noting the paint blisters at the seam. Really don't want to do a complete coating on the inside of the tank like Caswells or similar. What will be gas proof/resistant that will flow into the seam to seal it? Maybe Loctite (as per recent fuel pump rebuild thread)????

Proper clean and sanding and then 2 component material. I used JB Weld with good results.

Yes, was wondering about JB Weld. I do have some on my bench for that purpose. I'll be working inside the tank, so whatever is used will be permanently submersed in fuel.

It's sitting OK for two years now here.

And that's inside the tank?

Yep