BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » 41.3 dia. K100 front fork

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   41.3 dia. K100 front fork Empty 41.3 dia. K100 front fork Sat Aug 12, 2023 4:19 pm

arbalest

avatar
Silver member
Silver member
Can anyone point me to a 41.3 K100 fork diagram? The MAX BMW Parts Fiche diagrams shows two damper drawings and one fork leg drawing.

    

2Back to top Go down   41.3 dia. K100 front fork Empty Re: 41.3 dia. K100 front fork Sat Aug 12, 2023 5:00 pm

jbt

jbt
Life time member
Life time member
There were 2 version of that fork, based on the very good Marzocchi M1R.
The left tube is damping compression, the right one is damping rebound.
The 1st had classical "open" damper, with a stack of washers.
The 2nd had a cartridge damper.
The tubes are specific for each type and can't be mixed.
Use https://www.realoem.com/ for exploded views.


__________________________________________________
Let us enjoy the transient delight
That fills our fairest day.
    

3Back to top Go down   41.3 dia. K100 front fork Empty 43.1 K100 fork Sat Aug 12, 2023 7:11 pm

arbalest

avatar
Silver member
Silver member
jbt wrote:There were 2 version of that fork, based on the very good Marzocchi M1R.
The left tube is damping compression, the right one is damping rebound.
The 1st had classical "open" damper, with a stack of washers.
The 2nd had a cartridge damper.
The tubes are specific for each type and can't be mixed.
Use https://www.realoem.com/ for exploded views.

Thanks. I will check it out.

    

4Back to top Go down   41.3 dia. K100 front fork Empty Re: 41.3 dia. K100 front fork Sun Aug 13, 2023 4:48 am

firstle

firstle
Life time member
Life time member
is there any way to id which forks you have from the outside , top etc , or is the only way to strip the forks ?

    

5Back to top Go down   41.3 dia. K100 front fork Empty Re: 41.3 dia. K100 front fork Sun Aug 13, 2023 6:31 am

jbt

jbt
Life time member
Life time member
AMHO, only by stripping the fork.


__________________________________________________
Let us enjoy the transient delight
That fills our fairest day.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » 41.3 dia. K100 front fork

Permissions in this forum:
You cannot reply to topics in this forum