Any one know how to program this speedo? I can't change the settings for fuel lines. The rest of the settings seems to work fine.

Ha, the things you find out when you look. So, in an effort to help you, I went to the Five Aces site and the support page.  Right on that page is a document for Troubleshooting the Fuel Sender unit.  What would you know but it is a copy of my posting to this forum "Messing with the In-tank Fuel Sender".  Read that document and my thread on this forum.  I suspect you have to reverse the wire wound resistance plate on the sender to reverse the Ohms being sent to the Five Aces Mini gauge.

Lykke Til.

Rob, you are now a world famous technical writer.

Congratulations!!

robmack wrote:Ha, the things you find out when you look. So, in an effort to help you, I went to the Five Aces site and the support page.  Right on that page is a document for Troubleshooting the Fuel Sender unit.  What would you know but it is a copy of my posting to this forum "Messing with the In-tank Fuel Sender".  Read that document and my thread on this forum.  I suspect you have to reverse the wire wound resistance plate on the sender to reverse the Ohms being sent to the Five Aces Mini gauge.

Lykke Til.

Thanks,

The number in the picture that I have pointed out with arrow; shouldn't I be able to change this to 2 in stead of 3? I mean, I thought that was the problem here, isn't it? ...or is it just an indication of what is connected?
The manual says 2 is for 2 fuel lines and 3 is for 3 fuel lines. (the manaul is written in bad translated english, but any how..my english isn't perfect either  )

http://forum.kforum-tech.com/members-upload/uploads/WIRE_CONNECTION_DIAGRAM_-_MINI.pdf

After a long day on the bike I ran out of gas and now I know that 5 bars on the meter is full and 3 bars is empty...  

(I actually got to a gas station as the bike was choking on the fumes)  

I think the value should be 2, not 3, However I can't help you with figuring out how to change it. Have you written to. Five Aces to ask?