BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Brake Disc cap nuts

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Brake Disc cap nuts Empty Brake Disc cap nuts Wed Aug 10, 2022 4:02 pm

gravelsandwich

gravelsandwich
active member
active member
Has anybody tried using connector cap nuts for attaching brake discs to the center hub? They would look a bit neater than a M6 bolt and lock nut. An M6x12mm connector and an M5x10mm bolt.

https://www.ebay.com.au/itm/144111618057?var=443542560315

    

2Back to top Go down   Brake Disc cap nuts Empty Re: Brake Disc cap nuts Fri Aug 12, 2022 9:44 am

bad boy

bad boy
Life time member
Life time member
Two Wheels Better wrote:
Big Bock K100 
post #38
Wed Jan 21, 2015

I've found the perfect brake disc hold down screw from BMW.
It's a T30 Torx®, part number 34 11 7 700 989, with shoulder, 8 x 27mm x 1.25 thread pitch, from any late model R, K or S Beemer.

Brake Disc cap nuts Imag1026

No machining's required and they clear the inside of the fork legs by a country mile.


__________________________________________________
Cheerz, David

Brake Disc cap nuts 9438-010

____________________________________________________________________________
1997 Peraves Super Ecomobile: a Kevlar reinforced monocoque with outrigger wheels, seating two.
K75 fork, K100 monolever, headlight, indicators, K1100RS gearbox, K1200RS 589 instrument cluster, engine, rear wheel
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Brake Disc cap nuts

Permissions in this forum:
You cannot reply to topics in this forum