BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Coils Empty Coils Mon Jun 14, 2010 11:34 pm

hcritz

avatar
active member
active member
Hey Folks.
Just changed out my factory coils with the Dynatec 3 Ohm green coils...they fit the factory wires just perfectly and an old set of honda coil mounts fit perfectly as well. I'll try and take pictures and post them.
Got rid of all my strange Idle and off idle issues...bike runs very well now. Local guy had them for $77 buck each.

    

2Back to top Go down   Coils Empty Re: Coils Tue Jun 15, 2010 1:20 am

Ned

Ned
Life time member
Life time member
Hi,
Yes, can you please post a few pics. I was thinking about mounting BMW coils on my Goldwing, but decided on Dyna 3 Ohm as you have. The old GW coils disintegrated after years of POs abuse.

My guess is that now you don't really need to concern yourself with which HT leads you need to use.

    

3Back to top Go down   Coils Empty Re: Coils Tue Sep 08, 2020 5:39 pm

nino

avatar
Life time member
Life time member
Hello I found clon dynatec 3 coils on chinese banggood.com. I dont know if its worth but much cheaper than Dynatec on ebay.
FYI

https://www.banggood.com/Motorcycle-3-ohm-Dual-Output-Ignition-Coil-For-Honda-cb-500-550-750-gl1000-p-1608602.html?rmmds=search&cur_warehouse=CN

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum