BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Clutch boot question

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Clutch boot question Empty Clutch boot question Tue Mar 31, 2020 3:29 pm

Tommy2305

Tommy2305
Silver member
Silver member
I've bought a new clutch boot since the old one was ripped. The new on sits loose on the recess on the clutch arm so it does not have a tight seal. The old one was very tight and sealed properly around the recess so  i guess it should have a tight fit and not loose, like the new boot?

best regards


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

2Back to top Go down   Clutch boot question Empty Re: Clutch boot question Tue Mar 31, 2020 3:50 pm

Dai

Dai
Life time member
Life time member
It should push on fairly easily but there is a metal band that goes around it to stop it from pulling off again.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   Clutch boot question Empty Re: Clutch boot question Tue Mar 31, 2020 6:52 pm

Tommy2305

Tommy2305
Silver member
Silver member
Dai wrote:It should push on fairly easily but there is a metal band that goes around it to stop it from pulling off again

Must have missed that, thanks I appreciate it


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

4Back to top Go down   Clutch boot question Empty Re: Clutch boot question Tue Mar 31, 2020 7:54 pm

Dai

Dai
Life time member
Life time member


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

5Back to top Go down   Clutch boot question Empty Re: Clutch boot question Tue Mar 31, 2020 8:23 pm

duck

duck
Life time member
Life time member
Clutch boot question 7LslM3A


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

6Back to top Go down   Clutch boot question Empty Re: Clutch boot question Wed Apr 01, 2020 7:04 pm

Tommy2305

Tommy2305
Silver member
Silver member
The problem is not around the recess on the gearbox I think I misunderstood the part with "metal ring" around the boot.

The boot doesn't seal on the clutch arm, it is a loose fit. Should it be tight?


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

7Back to top Go down   Clutch boot question Empty Re: Clutch boot question Wed Apr 01, 2020 7:10 pm

duck

duck
Life time member
Life time member
Yes, it should be fairly tight but not hermetically sealed tight. If you undo the clutch cable from other end of the clutch arm then it may fall out like in the picture above.

Do you still have the remnants of the old one?  New and old should be just about as snug.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

8Back to top Go down   Clutch boot question Empty Re: Clutch boot question Wed Apr 01, 2020 7:15 pm

Tommy2305

Tommy2305
Silver member
Silver member
Not sure if it ripped while I took it off because it was tight, and yes I saved it for some reason but it is not at my home address. But I remember I was tight and not loose, which made me wonder when I compare the new boot


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

9Back to top Go down   Clutch boot question Empty Re: Clutch boot question Sun Apr 05, 2020 12:26 pm

Tommy2305

Tommy2305
Silver member
Silver member
I ordered it form tills.de, should I write to them about the problem? the boot will not seal.. Clutch boot question Img_1318
Clutch boot question Img_1319


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

10Back to top Go down   Clutch boot question Empty Re: Clutch boot question Sun Apr 05, 2020 12:53 pm

duck

duck
Life time member
Life time member
Do you know if the tills.de part is from BMW or a third party?

I've replaced lots of them with the BMW OEM part and never had an issue.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

11Back to top Go down   Clutch boot question Empty Re: Clutch boot question Sun Apr 05, 2020 12:56 pm

Tommy2305

Tommy2305
Silver member
Silver member
I'm pretty sure it is not original parts. They have different seals made in viton which is guess is not original? also the packaging does not look like BMW OEM parts..


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

12Back to top Go down   Clutch boot question Empty Re: Clutch boot question Sun Apr 05, 2020 2:42 pm

duck

duck
Life time member
Life time member
In that's case then I'd email their sales support and request a refund.

I've always had good luck buying stuff from Motobins(UK). They have BMW OEM parts at an OK discount.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

13Back to top Go down   Clutch boot question Empty Re: Clutch boot question Sun Apr 05, 2020 7:34 pm

Tommy2305

Tommy2305
Silver member
Silver member
Yep I did, and I got a refund within 30 minutes. Really quick respons. 

Thank you for your feedback, I appreciate it Wink


__________________________________________________
BMW K100RT 1987 "cafe racer"
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Clutch boot question

Permissions in this forum:
You cannot reply to topics in this forum