BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Gr-Racing

Gr-Racing
active member
active member
hello im in the process of wiring in the aftermarket controls on my K, I have the wiring diagram and have done some searching and Im pretty sure I got the right side control correct.

my left side control not so much and hence im here asking from a bit of info from the gurus.

I know I have to re wire the turn signals and install a aftermarket relay for them im ok on that

my problem is how to wire the setup I want correct on the left control I want  headlight on/off , Headlight High beam , turn signal

im almost there but want to double check before I blow up the garage .

sorry for my crappy diagram

installing aftermarket controls 3 switch i need  help plz E08771-EB-8882-4644-A6-F9-203-C9-AD39379

    

Dai

Dai
Life time member
Life time member


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Gr-Racing

Gr-Racing
active member
active member
Thanks for the reply, i seen it and pull some info from it but the wire color are a bit hard to understand

    

Gr-Racing

Gr-Racing
active member
active member
Sorry i just saw that my dislexia strikes again for the start is black/green and black/yellow

    

duck

duck
Life time member
Life time member
Left:
Pin #ColorDesc.
1WhiteHigh beam, indicator in cluster
2Open
3Blue/BrownLeft turn signal - ground to flasher relay Pin 8
4YellowLow beam
5Open
6BrownGround in
7White/YellowHeadlight power in from right combo switch
8Green/BlueLoad shed relay, F7, headlight power in to right combo switch
9Brown/YellowHorn relay - ground

Right:
Pin #ColorDesc.
1aBrown/WhiteTurn signal cancel - ground to flasher relay
1Black/YellowPower to starter from start button from Pin 6
2Green/YellowPower to lots of things (to Pin 9 via kill switch)
3Gray/BlueShorted to Pin 4 with gray wire (parking lights)
4White/YellowHeadlight power to left combo switch
5Blue/YellowRight turn signal (grounds)
6Black/GreenPower to start button from clutch switch and gear indicator
7Green/BlueShorted to Pin 4 with gray wire (power in for parking/head lights)
8BrownGround in
9GreenLoad shed relay, ignition switch


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Gr-Racing

Gr-Racing
active member
active member
thanks for the help guys, got the right side working fine still working on the left control

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum