BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Replacing the clutch components. Empty Replacing the clutch components. Sat Oct 27, 2018 3:33 am

gabriel

avatar
Platinum member
Platinum member
Hi

I will be replacing the friction plate in my bmw k75.
Beemerboneyard suggests replacing ALL clutch components which can be costly.
How necessary is this and what are the possible consequences/issues if I replace the friction plate and reuse the pressure plates?
All opinions appreciated.

Regards

Gabriel


__________________________________________________
;BMW; 1984 BMW k100..frame number 6228?
1992 BMW K75s
    

2Back to top Go down   Replacing the clutch components. Empty Re: Replacing the clutch components. Sat Oct 27, 2018 4:03 am

Rick G

Rick G
admin
admin
Nothing wrong with using the old ones provided they are flat, occasionally you see them with a dish ant that makes it so they only grab on the outer rim and will slip.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Replacing the clutch components. Empty Re: Replacing the clutch components. Sat Oct 27, 2018 6:10 am

duck

duck
Life time member
Life time member
I've replaced just the clutch plate before and had no issues.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

4Back to top Go down   Replacing the clutch components. Empty Re: Replacing the clutch components. Sat Oct 27, 2018 6:39 am

Dai

Dai
Life time member
Life time member
What Rick says. It's one of those jobs where you need to dismantle it to find out what you need. Put a straight edge across the pressure plate before thinking about buying a new one.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

5Back to top Go down   Replacing the clutch components. Empty Re: Replacing the clutch components. Sat Oct 27, 2018 6:42 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
I replaced only the plate on my RS in 2010 after a leaking o-ring episode which I caught quickly. The rest of the friction surfaces looked good, were relatively flat, and after a thorough cleaning I went ahead with it. For the first couple hundred kilometres I could almost get it to slip at hard revs, but that went away. I thought I'd made a big mistake, but since then I've put 12,000 kms or more on it since, no worries.

Of course, if you replace every clutch wear surface you'll get longer life. It stands to reason. Instead it's like whacking a new set of brake pads on a worn brake disc. She'll be right, mate.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum