BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Paint stripping on pannier rubber Empty Paint stripping on pannier rubber Wed Sep 19, 2018 11:35 am

88

88
Life time member
Life time member
Hi all, I recently scored a set of S3 panniers for my LT. Unfortunately the P.O. sprayed them including the rubbers to match his bike. Needless to say it cracked and scuffed.


Has anybody tried stripping paint off rubber? I like to get the plastic painted but leave the rubbers original black.


__________________________________________________
Paint stripping on pannier rubber Ir-log1188....May contain nuts!Paint stripping on pannier rubber Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

MartinW

MartinW
Life time member
Life time member
I'm not sure whether due to the texture whether you are going to be 100% successful in removing all the paint without damaging them. However there are rubberized spray pack coatings that could be used to cover any damage caused by the paint removal.

Regards Martin.


__________________________________________________
1992 K75s
    

88

88
Life time member
Life time member
Yes good idea, I think Duck ruggedised some of his with truck bed liner or such. I must have a look at what products are available here


__________________________________________________
Paint stripping on pannier rubber Ir-log1188....May contain nuts!Paint stripping on pannier rubber Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

MartinW

MartinW
Life time member
Life time member
I've used Rust-Oleum truck bed liner and Dupli-Color bed armor spray cans with good results.

Regards Martin


__________________________________________________
1992 K75s
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
I think that the Duck uses Line-X or one of the other commercially applied truck bed liners on his bikes.   Says they use a two part coting that bonds better and is tougher against dings.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

MartinW

MartinW
Life time member
Life time member
If the worst happens I believe the bumpers might still be available new, $70.00 per side. Check A&S BMW.
Regards Martin.


__________________________________________________
1992 K75s
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum