Hi all,

I am hoping you might be able to answer this quick question. I have replaced most of the wiring on my K75 project. Where the plugs go on the injectors there is a random loose wire. It may have had a terminal on it?. I checked to see if there was contunity with ground or voltage. Nothing. Does anyone know where this wire connects to the bike?

Picture uploading seems disabled for me so here is a Google drive Link to the offending wire

https://drive.google.com/file/d/1rKujKu3HSsf2jr3zC5zcCXDJ2EkmnLX1/view?usp=drivesdk


Thanks
Ed

Its a brown wire so it goes to ground. There is a 6mm threaded hole between 2-3 cyl injectors on the head (the lower mount for the fairing also uses it) look down just behind the fuel rail and use a 6M bolt about 10mm length and tightens to about 8ft/lb

H Rick, 

Thanks for the quick reply!. I was not sure as I was not seeing contunity with anything.