BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Member's introduction » New to BMW K100

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   New to BMW K100 Empty New to BMW K100 Sat May 26, 2018 2:54 am

jreali

jreali
New member
New member
Hello from Timor-Leste! 
I got a 1983 K100 from an Australian who brought it here years ago. I've been trying to make it work and here is the trouble:
When I push the start button I got the ground signal from the ignition module to the ignition relay but when I release the button it doesn't keep the ground signal and cut the injection.
There's also no output ground from the EFI computer box to injectors. I already tested the EFI computer and it's working fine. Any ideas?
Thanks
Jose Reali

    

2Back to top Go down   New to BMW K100 Empty Re: New to BMW K100 Sat May 26, 2018 3:14 am

Rick G

Rick G
admin
admin
Test the hall sensors it sounds like them. the earth will only remain for 1.5 seconds or if the engine is running and it gets signals from the hall sensors.
I nearly forgot to say Hi to you.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Member's introduction » New to BMW K100

Permissions in this forum:
You cannot reply to topics in this forum