BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   I guess these pics should go here Empty I guess these pics should go here Sat Apr 14, 2018 7:44 pm

Sooprvylyn

Sooprvylyn
active member
active member
Here is my k75 build so far. My first bike, learned how to weld and fiberglass so I could do this back end work(and get lots of hoa fines in the process). Rode her for about a year and dropped her once to get that out if my system before getting to work on her.

Found a used k100 tank to replace my dented up tank, thinking I was gonna strip and polish the new(to me) aluminum tank. When it arrived the factory paint was purrrrrrfect so I just couldn't do it. Instead I had to build a custom rear end and modify my k75 radiator cover to line up w the bigger tank. A fresh coat of paint(except tank) and a little powder coating (plus hours of playing with the parts that make her go) and this is the result. Still a little bit left to do, like swapping out the ugly oem controls and levers, but she's turning heads already.

Imo BMW got it almost right, just wanted to show them where they went wrong😂...jk, my take on the k75.


You cannot start a new topic for this subject.
You can only reply.
I guess these pics should go here Img_2015
I guess these pics should go here Img_2016
I guess these pics should go here Mvimg_13
I guess these pics should go here Img_2017
I guess these pics should go here Mvimg_12
I guess these pics should go here Img_2018
I guess these pics should go here Mvimg_14
I guess these pics should go here Img_2019

    

Sooprvylyn

Sooprvylyn
active member
active member
A few in progress pics


I guess these pics should go here Mvimg_15
I guess these pics should go here Mvimg_16
I guess these pics should go here Img_2020

    

jmccrary

jmccrary
Silver member
Silver member
Which headlight are you using?

    

Sooprvylyn

Sooprvylyn
active member
active member
This bucket

[url=7]7" Side Mount Motorcycle Headlight - Matte Black Amber - Vintage Custom Cafe Racer Brat Bobber Chopper https://www.amazon.com/dp/B01MRW8U8U/ref=cm_sw_r_cp_apa_i_n-.4Ab9XQY3KM[/url]

This bulb

[url=OVOTOR Black 7inch Harley LED Headlight 7]OVOTOR Black 7inch Harley LED Headlight 7" Motorcycle LED Headlamp for Harley Touring Street Glide Road King Pack of 1 https://www.amazon.com/dp/B06XSZTS8Q/ref=cm_sw_r_cp_apa_i_l..4Ab6073NYA[/url]

And these turn signals with led replacement bulbs

[url=TASWK 2Pcs Heavy Duty Motorcycle Bullet Turn Signals Blinker Amber Indicator Lights Lamp (Black) https://www.amazon.com/dp/b072c5ppnk/ref=cm_sw_r_cp_apa_i_1aa5Ab0YXHYWE]TASWK 2Pcs Heavy Duty Motorcycle Bullet Turn Signals Blinker Amber Indicator Lights Lamp (Black) https://www.amazon.com/dp/B072C5PPNK/ref=cm_sw_r_cp_apa_i_1aa5Ab0YXHYWE[/url]

I had to drill out the healight clamps and bucket to accept the threaded turn signals which now actually secure the bucket.

The clamps were purchased off my neighbor...not sure the make but can find out if needed.

    

jmccrary

jmccrary
Silver member
Silver member
Thank you!!

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum