BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Ohlins question

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Ohlins question Empty Ohlins question Wed Aug 02, 2017 3:59 am

duck

duck
Life time member
Life time member
Anybody know if the hydraulic line to the remote reservoir (I think it's pre-load) is under pressure?

I want to change the angle of the banjo bolt on the reservoir but don't want to loosen it if it will discharge pressure in the shock.

Ohlins question K1100r10


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

2Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 8:38 am

Rick G

Rick G
admin
admin
Yes it sure is


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 9:34 am

duck

duck
Life time member
Life time member
Thanks.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

4Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 3:57 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
...but if you ever do need service locally on your Öhlins, I can recommend both KFG Racing (Kung Fu Grip) in Auburn WA and Alyxmoto in Buckley WA on Highway 410. Alex just serviced my R1150RT shockies and KFG did my R1150GS front shockie. All reasonable, competent and timely. KFG will service other brands as well.

Alex had just received his new Swedish Öhlins vacuum pump and I swear the shocks came back to me all pumped up!


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

5Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 4:41 pm

Motorbike Mike

Motorbike Mike
Life time member
Life time member
The preload adjuster is NOT under the same pressure as the shock body.
The preload adjuster is the hydraulic adjustment of the spring only. If it were me, I'd back the adjustment right out, crack the union 1/8th of a turn and turn it where you like then retighten. Make sure the bike is on the centre stand to take as much load off the spring as possible.

Be careful and you'll be fine.

    

6Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 4:52 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Agreed, keep the preload all the way backed out. Otherwise, what you will lose if you loosen the banjo bolt too much and fluid escapes, is a certain percentage of your ability to adjust preload. Otherwise, be careful and you'll be, as we say, laughing. This is confirmed by an Öhlins service centre.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

7Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 7:54 pm

duck

duck
Life time member
Life time member
Two Wheels Better wrote:...but if you ever do need service locally on your Öhlins, I can recommend both KFG Racing (Kung Fu Grip) in Auburn WA and Alyxmoto in Buckley WA on Highway 410. Alex just serviced my R1150RT shockies and KFG did my R1150GS front shockie. All reasonable, competent and timely. KFG will service other brands as well.

Alex had just received his new Swedish Öhlins vacuum pump and I swear the shocks came back to me all pumped up!

Good info. Didn't know there were good Ohlins shops in the area. (Also a good excuse to go ride Windy Ridge.)


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

8Back to top Go down   Ohlins question Empty Re: Ohlins question Wed Aug 02, 2017 8:02 pm

duck

duck
Life time member
Life time member
Decided to leave it be and made my own new mount for it that doesn't require messing with the preloader banjo bolt.Ohlins question Dsc01314


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Ohlins question

Permissions in this forum:
You cannot reply to topics in this forum