1
K100rs flat spot mid range Wed Apr 19, 2017 12:10 pm
tyetye
![tyetye](https://i.servimg.com/u/f41/11/71/56/74/avatar10.jpg)
active member
![active member active member](https://i.servimg.com/u/f80/11/71/56/74/bmw-1s10.gif)
I've just finished building a cafe racer with my son's. On riding I've found a flat spot mid range. I've looked into this and found the original wiring loom had a cornection between the ALT and rev counter and then down the the IGN ecu for the IGN advance and retard.
I don't have a rev counter or this cornection.
Can I
1 cornect straight from B+ on my ALT to the IGN ecu so it came see engine speed
OR
2 change the timing on the HALL pick up plate to get a happy medium as this bike is only to be used for shows and will only cover a few miles per year.
I don't have a rev counter or this cornection.
Can I
1 cornect straight from B+ on my ALT to the IGN ecu so it came see engine speed
OR
2 change the timing on the HALL pick up plate to get a happy medium as this bike is only to be used for shows and will only cover a few miles per year.