1 Speedometer / Odometer Repair Sat May 21, 2016 8:05 pm
KyleMB
active member
Neither one work & its busting my balls.
I've checked the sensor on the final drive with ohmsmeter, ive cleaned the sensor, i've check ohmsmeter from the connection under the seat to the pin on the back of the instrument cluster (im getting a reading). I've open the instrument cluster and used steel wool on the 3 top pins and 4 bottom pins, cleaning them with circuit cleaner, deoxit, filed them a bit and twisted them slightly to make sure they contact well. I also cleaned the inside pin connectors thoroughly. I tested the motor inside the cluster as mentioned in this website: http://hrsbstaff.ednet.ns.ca/bvogel/K100/Fixing-the-speedo/k_bike_speedo_repair.htm with the ohmsmeter and everything checked out. Gears works. Everything else in the cluster works fine.
Nothing.
I'm stumped. I can't really seem to find much more repair information past this so anything relevant would be much appreciated.
1988 K100 LT
I've checked the sensor on the final drive with ohmsmeter, ive cleaned the sensor, i've check ohmsmeter from the connection under the seat to the pin on the back of the instrument cluster (im getting a reading). I've open the instrument cluster and used steel wool on the 3 top pins and 4 bottom pins, cleaning them with circuit cleaner, deoxit, filed them a bit and twisted them slightly to make sure they contact well. I also cleaned the inside pin connectors thoroughly. I tested the motor inside the cluster as mentioned in this website: http://hrsbstaff.ednet.ns.ca/bvogel/K100/Fixing-the-speedo/k_bike_speedo_repair.htm with the ohmsmeter and everything checked out. Gears works. Everything else in the cluster works fine.
Nothing.
I'm stumped. I can't really seem to find much more repair information past this so anything relevant would be much appreciated.
1988 K100 LT