1 New Member from Germany Thu Jan 21, 2016 7:21 am
six1
VIP
Hello,
my name is Michael, I'm from Germany/Hessen. So my native language is German, please excuse misspellings.
Some time ago, I drove a K75 at work. I owned some Honda's, different Models and ended at K75RT years ago.
K75 didn't have enough power, for riding with pillion passenger.
Next was a K1100LT. I did a lot of improvements on this.
First, i was developing a unit, to balance intake and read and reset Motronic and ABS. This was mainly called "Karacho", later on UDIAG or VAC-DIAG.
(UDIAG on Youtube Balance Intake , Reset Motronic Error )
Modified Intake, modified Ignition. RPM end was at 10.500
Another Project was the KARAMBA project. Software KARAMBA was for setup Speedo, to show proper speed.
There was also a little circuit board (Microcontroller), which was able to transform frequency from speed sensor into different frequency. So the Speedo Counter and Trip Counter were coreccted, in case of one has changed wheel/tire size. (important on Sidecar bikes to get german "tüv")
However, Projects are history
In time i'm driving a K1200RS. No improvements! It's working since a long time (97') without any problems.
As you all know: never change a (good) running system
because of a coincidence, i found this forum and that members are using my old Karamba Project. So i decided
to bring it back to life with some corrections and a linux version.
my K1200RS...
Best, Michael
my name is Michael, I'm from Germany/Hessen. So my native language is German, please excuse misspellings.
Some time ago, I drove a K75 at work. I owned some Honda's, different Models and ended at K75RT years ago.
K75 didn't have enough power, for riding with pillion passenger.
Next was a K1100LT. I did a lot of improvements on this.
First, i was developing a unit, to balance intake and read and reset Motronic and ABS. This was mainly called "Karacho", later on UDIAG or VAC-DIAG.
(UDIAG on Youtube Balance Intake , Reset Motronic Error )
Modified Intake, modified Ignition. RPM end was at 10.500
Another Project was the KARAMBA project. Software KARAMBA was for setup Speedo, to show proper speed.
There was also a little circuit board (Microcontroller), which was able to transform frequency from speed sensor into different frequency. So the Speedo Counter and Trip Counter were coreccted, in case of one has changed wheel/tire size. (important on Sidecar bikes to get german "tüv")
However, Projects are history
In time i'm driving a K1200RS. No improvements! It's working since a long time (97') without any problems.
As you all know: never change a (good) running system
because of a coincidence, i found this forum and that members are using my old Karamba Project. So i decided
to bring it back to life with some corrections and a linux version.
my K1200RS...
Best, Michael
Last edited by six1 on Thu Jan 21, 2016 7:55 am; edited 2 times in total