BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   place for good priced parts Empty place for good priced parts Wed Sep 30, 2015 7:42 am

ryancoke

ryancoke
active member
active member
anyone know where the best place for best price and service for Canada and/or the US is? thanks!

    

2Back to top Go down   place for good priced parts Empty Re: place for good priced parts Wed Sep 30, 2015 8:57 am

Point-Seven-five

Point-Seven-five
Life time member
Life time member
I get most of my parts used on eBay.  New I usually go to Max BMW who is also on the interweb.  They are in New Hampshire.  Don't know if they ship to the Great White North(GWN).

I do all my own work.  Most of the routine tasks on these bikes are fairly user friendly.  There is an independent shop about 40 miles away that has a lot of the official tools for the tougher jobs.  I am pretty sure that if you ask around you will find someone who can do the jobs that require the special tools.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

3Back to top Go down   place for good priced parts Empty Re: place for good priced parts Wed Sep 30, 2015 9:08 am

Holister

Holister
Life time member
Life time member
Electrical bits and pieces like starter motor and alternator brushes, relays, pump bits etc etc
http://www.euromotoelectrics.com/BMW-K-Parts-s/60.htm

Some of the service parts are standard compatable parts from other vehicles. Just got to shop around.


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808
 place for good priced parts Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

4Back to top Go down   place for good priced parts Empty Re: place for good priced parts Wed Sep 30, 2015 11:28 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
We musn't forget the UK suppliers, who have a fair few of the bits we need for our beloved Ks. They are Motorworks, Motobins and James Sherlock. Add the 'co.uk' bit where appropriate and you'll be laughing. In Los Estados Unidos, there's Beemerboneyard, the aforementioned EME in Colorado for fuely and electricky bits, and Repsycle in Ohio for used.

Dunno if he's up and running since his relocation but Kbikeparts.com (Seattle) will connect you with our esteemed Duck for the odd secondhand bit. I can provide new OEM parts from the Tacoma area but will (technically, legally according to BMWNA dealer agreement) only be allowed to post them up to the frontier. You'll have to have a US-based PO box near there.

HERE'S the BMW spezialist near your locale. We used to sell them OEM parts several years back but they sorta went underground for a while. I dunno about their rep. They too, had their shipments sent to the border.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

5Back to top Go down   place for good priced parts Empty parts supply in the GWN Wed Sep 30, 2015 2:25 pm

nvboy

nvboy
Silver member
Silver member
I've used bikebandit.com and realoem.com with good luck.  At minimum you can locate the part name and number, even if they don't have it.  I've found having a 'muricanmailbox helps in all cases including eBay.  Has saved me more in postage than the cost of driving to the border, plus it saves untold hassles with duty etc.  I have a NEXUS card (trusted traveler) so going over the border is a snap in both directions.

on the blessed coast of Oh Canada
nvboy


__________________________________________________
place for good priced parts Can-lo10
    

6Back to top Go down   place for good priced parts Empty IM NEW TO THIS Mon Oct 05, 2015 10:16 am

ossa

ossa
New member
New member
DONT KNOW HOW TO NAVIGATE AROUND .this site....can i get some instruction please......how do i introduce myself?......
and how do i find topics of interest.

    

7Back to top Go down   place for good priced parts Empty Re: place for good priced parts Mon Oct 05, 2015 10:55 am

Rick G

Rick G
admin
admin
Go to the tab marked FORUM and right at the top of that page is the new members introduction


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum