Hi
I am a newbie to this site, can anyone please help me with a supplier for a 1991 4V K100rs rear disc and master cylinder, no ABS.
I am an eBay member or I have PayPal, I have seen disc's for $280 Australian dollars, is that the best price I can get?
Cheers Mike

Mike you will find that most of the Aussies here get almost all the parts from UK or US. Motobins, Motoworks And James Sherlock are the 3 best suppliers in UK so check this out and you might also get a much cheaper m/c without too much freight. https://www.james-sherlock.co.uk/component/virtuemart/?page=shop.browse&category_id=339
If you want a really good disc for a similar price as Metalgear check out EBC from a US or European source.

Thanks I appreciate the help, I am sure as the K100 journey grows longer I will need to get more advice. Cheers

eBay Europe going cheap

...for example.

RicK G wrote:Mike you will find that most of the Aussies here get almost all the parts from UK or US. Motobins, Motoworks And James Sherlock are the 3 best suppliers in UK so check this out and you might also get a much cheaper m/c without too much freight. https://www.james-sherlock.co.uk/component/virtuemart/?page=shop.browse&category_id=339
If you want a really good disc for a similar price as Metalgear check out EBC from a US or European source.

Just need to be aware that some dealers require you to send your old discs back to them so that they can be refurbished. This is good as it keeps the unit price down, but it effectively doubles your shipping costs. You are likely to get charged a refundable "deposit" to encourage you to honour the agreement...check the small print (they are actually very open about it).

When I got a second-hand set of front and rear (ABS discs) from James Sherlock for my first LT, I paid £175 for the 3 discs and an additional £125 deposit. It cost me about £10 to send the old discs back...obviously that would be considerably more from Aus.