BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Electrical » Removing OEM Flasher Relay brick to wire in alternate handlebar switches

View previous topic View next topic Go down  Message [Page 1 of 1]

Scottybullet

Scottybullet
active member
active member
I am Working on my cafe project and part of it is replacing the controls with GSXR controls with a standard (Left-Off-Right) switch but I didn't want to chop up the harness any more than I already had. So Adding an Electronic flasher and a couple of micro relays to keep them hidden in the existing electrical box. here's a quick ugly diagram which works great on my setup. 

Removing OEM Flasher Relay brick to wire in alternate handlebar switches K1100_11



Last edited by Scottybullet on Tue May 14, 2019 11:50 am; edited 1 time in total

    

duck

duck
Life time member
Life time member
Blue/black is right. Blue/red is left.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Scottybullet

Scottybullet
active member
active member
duck wrote:Blue/black is right. Blue/red is left.
Thanks, Long day. Updated... at least I wired mine properly Smile

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Electrical » Removing OEM Flasher Relay brick to wire in alternate handlebar switches

Permissions in this forum:
You cannot reply to topics in this forum