BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Ultrasonic bath fluid. Empty Ultrasonic bath fluid. Mon Aug 25, 2014 6:22 pm

BooG

BooG
Platinum member
Platinum member
Could I use vinegar to clean injectors in the ultrasonic cleaner?

    

2Back to top Go down   Ultrasonic bath fluid. Empty Re: Ultrasonic bath fluid. Mon Aug 25, 2014 8:31 pm

japuentes

japuentes
Life time member
Life time member
Hi there, I know that water based solutions, some with vinegar, are used for ultrasonic brass cleaning, but don't know how it will affect the injector coil.
Best regards
JAP


__________________________________________________
Ultrasonic bath fluid. 2854237993 1988 K100RS SE/ABS
    

3Back to top Go down   Ultrasonic bath fluid. Empty Result! Tue Aug 26, 2014 2:33 pm

BooG

BooG
Platinum member
Platinum member
Yep....25% white vinegar and warm water 75%...you should have seen the crud that came out /off the injectors!! They had about 10 baths of three minutes and had to change the solution about four times. New o-rings on, and when they were back on the rail I tested them pulsing on some cardboard. Firing on all cylinders, smooth as you like!

    

4Back to top Go down   Ultrasonic bath fluid. Empty Re: Ultrasonic bath fluid. Thu Aug 28, 2014 2:37 pm

Maxip2605

Maxip2605
New member
New member
Why dont you try a cleaning product like wynn's or equivalent  injector cleaner product for car or bike.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum