BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Crash bar removal

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Crash bar removal Empty Crash bar removal Wed Aug 13, 2014 11:35 am

Holister

Holister
Life time member
Life time member
I need to remove the lower fairing on my RT but I can't get this top crash bar mounting undone. I'm sure it's gotta be simple but I don't want to force anything and I've not done this before.

Crash bar removal K100_c10


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808		 Crash bar removal Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

2Back to top Go down   Crash bar removal Empty Re: Crash bar removal Wed Aug 13, 2014 11:50 am

kioolt

kioolt
Silver member
Silver member
Underneath the plastic cap on the outside of the crashbar is a nut that you need to remove.


__________________________________________________
2004 R1150RT 186,800 miles 
1991 K100LT 128,700 miles
1982 R100RT 106,900 miles
Total 422,400 BMW miles

AMA,BMWRA,BMWMOA


The cheapest thing on a BMW is the nut that connects the handlebars to the seat.
    

3Back to top Go down   Crash bar removal Empty Re: Crash bar removal Wed Aug 13, 2014 7:36 pm

Rick G

Rick G
admin
admin
It's a 13mm nut and you need a tube spanner or a 6" extension for a 3/8 drive ratchet. the pull the plastic cap as K1oolt said and you're in.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

4Back to top Go down   Crash bar removal Empty Re: Crash bar removal Wed Aug 13, 2014 8:05 pm

kioolt

kioolt
Silver member
Silver member
Crash bar removal 2
Remove part no. 10 to get to nut no. 9.


__________________________________________________
2004 R1150RT 186,800 miles 
1991 K100LT 128,700 miles
1982 R100RT 106,900 miles
Total 422,400 BMW miles

AMA,BMWRA,BMWMOA


The cheapest thing on a BMW is the nut that connects the handlebars to the seat.
    

5Back to top Go down   Crash bar removal Empty Re: Crash bar removal Wed Aug 13, 2014 9:36 pm

Holister

Holister
Life time member
Life time member
Kool. Thanks guys.

 Very Happy


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808		 Crash bar removal Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Crash bar removal

Permissions in this forum:
You cannot reply to topics in this forum