BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Parts, Accessories and part substitution » 4-1 merge collector (exhaust replacement)

View previous topic View next topic Go down  Message [Page 1 of 1]

JCK100

JCK100
active member
active member
Has anyone had any luck finding an off the shelf 4-1 28mm(1 1/8 ) merge collector?

I've seen heaps of 1 1/2 online and getting for reducers to get from the factory 28mm to 1 1/2 just seems unnecessary.

I have seen BSK's solution.  I can have one made locally for less than the $450AUD.



Last edited by JCK100 on Wed Jul 30, 2014 9:53 pm; edited 1 time in total


__________________________________________________
84 K100RS
85 K100RS
    

Rick G

Rick G
admin
admin
I couldnt find one so I made my own, anything I came up with was in inch sizes and didn't quite fit.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

JCK100

JCK100
active member
active member
RicK G wrote:I couldnt find one so I made my own, anything I came up with was in inch sizes and didn't quite fit.

Where did you get the 28mm stainless from rick?


__________________________________________________
84 K100RS
85 K100RS
    

JCK100

JCK100
active member
active member
And has anyone every just cut the back end of the factory muffler and broomhandled the guts out?

Harking back to the days of destroying catalytic converters in my youth.



Last edited by JCK100 on Wed Jul 30, 2014 10:07 pm; edited 1 time in total


__________________________________________________
84 K100RS
85 K100RS
    

Rick G

Rick G
admin
admin
I had to make it, Rolled it out of sheet.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

JCK100

JCK100
active member
active member
Anyone locally have a scrap one?  The two I have don't deserve to be cut up.


__________________________________________________
84 K100RS
85 K100RS
    

Rick G

Rick G
admin
admin
I have a muffler here that wore out by leaning too far you can have it if you want and cut it up for parts.
Its only a pleasant 2 1/2 hour ride to Stanthorpe


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

beanoldboy

beanoldboy
Life time member
Life time member
hello mate,  i also took to a muffler or two with the big blue handled screwdriver and a four pound hammer.
 there is a spare here, near to you by all appearances. having in the past acquired a set of headers and a supertrapp i will happily donate the stock muffler to science.

http://www.airware.com.au
    

JCK100

JCK100
active member
active member
Hi Bean,

Had a good look at one of mine last night.  It looks a likely candidate for cutting.  Appreciate the offer.

JC


__________________________________________________
84 K100RS
85 K100RS
    

JCK100

JCK100
active member
active member


__________________________________________________
84 K100RS
85 K100RS
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Parts, Accessories and part substitution » 4-1 merge collector (exhaust replacement)

Permissions in this forum:
You cannot reply to topics in this forum