Hi folks

Just a very short question

I have a flashing ABS light showing on my Ratified machine after a long time dead battery was replaced.

The previous owner has stripped back all the head stock and replaced the headlight etc, high bars and that sort of thing.

I now no longer have the small instrument panel that sits atop the fork tree so cannot press a button as advised in the reset posts and videos you find on the WWW.

So please advise what colour are the wires going to the switch please and where do they appear out of the loom and / or generally go to beneath the tank.

Many thanks.

It's a brown wire and a black wire (the switch connects to ground), the connector have a blue housing and is found under the tank.

Don't mix up with the wheel sensor connectors....all connectors related to the ABS have a blue housing.

Many thanks Inge, I can have a route around now in the morning and fingers crossed they are just cut and tucked away. will let you know the outcome.

Inge K. wrote:...all connectors related to the ABS have a blue housing.

Inge, IIRC doesn't the side stand switch on the 16V and K1100 have a blue housing as well?  Just an observation.

robmack wrote:Inge, IIRC doesn't the side stand switch on the 16V and K1100 have a blue housing as well?

Looks black to me...........

Yeah mine is black but I haven't looked at the plug yet 

It's black also.................

Its too rich see I just knew we could get to the bottom of the problem   Oh   Ummm what was the question.