BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Shiny screws and locknuts between throttle bodies.

View previous topic View next topic Go down  Message [Page 1 of 1]

billtr96sn

billtr96sn
Silver member
Silver member
What do they do? And why is it so bad to fiddle with them (by accident Hmm hmm)


__________________________________________________
Something witty is supposed to go here... help!! Shiny screws and locknuts between throttle bodies. Uk-log10
http://www.billsbikechat.co.uk
    

Guest

avatar
Guest
They lock all the butterflys together. I have fiddled with mine, but I have some good carb balancing tools, loads of patience, and I had just renewed the rubbers under the throttles. It changed the bike for the better.

    

billtr96sn

billtr96sn
Silver member
Silver member
Oh, that's ok then. No biggy.


__________________________________________________
Something witty is supposed to go here... help!! Shiny screws and locknuts between throttle bodies. Uk-log10
http://www.billsbikechat.co.uk
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Shiny screws and locknuts between throttle bodies.

Permissions in this forum:
You cannot reply to topics in this forum