BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Crush Washer sizing question

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Crush Washer sizing question Empty Crush Washer sizing question Thu Aug 29, 2013 5:32 pm

klamityboy

klamityboy
Gold member
Gold member
Looking at the microfiche for top and bottom crush washers for a gearbox oil change. The top is A18x22 and the bottom is A14x18-AL. Am I correct in assuming that the A refers to normal thickness, the first number is the inside diameter and the second number the outside diameter. Is the AL for aluminum?

Thanks in advance.


__________________________________________________
Klamityboy
1991 K75RT-P

Model Description: K 75RT
Market: Europe
Type: 0565
E-Code: K569
Engine: 3_ZYL - 0,70l (55kW)
Transmission: Manual
Body Color: Polizeiweiss
Production Date: 30.08.1990
    

2Back to top Go down   Crush Washer sizing question Empty Re: Crush Washer sizing question Thu Aug 29, 2013 10:07 pm

Rick G

Rick G
admin
admin
Yep I reckon you're right on that.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Crush Washer sizing question

Permissions in this forum:
You cannot reply to topics in this forum