BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Crazedbiker

Crazedbiker
active member
active member
Hi everyone,
So I've got a little problem. Well two, but I think they're connected...

My rear right-hand signal indicator and brake light don't work. When I cut the engine and restart it, the top fuse in the fuse box blows. Sure this is because of (my) incorrect wiring. Front signals work fine.

I've installed a tail tidy and new universal lights (brake and signals) - I thought I'd wired correctly but obviously not.

Does anyone know the correct way to wire between the rear signals and the brake light?

Many thanks in advance!

    

K-BIKE

avatar
Life time member
Life time member
Take a look at the circuit diagram for your year, without a model and year on your signature line it is hard to tell what year and model diagram to use.
Regards,
K-BIKE

    

Crazedbiker

Crazedbiker
active member
active member
Ah right - will sort that out! (K100RS 1987 by the way...)


__________________________________________________
K100RS 1987 Cafe Racer
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum