BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Special tools and jigs » valve shims for an 8valve 100 or a K75 (swap)

View previous topic View next topic Go down  Message [Page 1 of 1]

AL-58

AL-58
Life time member
Life time member
I'm sorry if this is a repeat thread from somewhere else on the site.
I've just done the shims on my 8v RS and that's all good. But the shim kit I have responsibility of(not mine) is drastically in need of certain shims and has an abundance of others.
I need some 2.35s, some 2.50s, some 2.55s and some 2.60s.
I have an abundance of 2.65s.
Anyone interested?
Al


__________________________________________________
'93 K1100LT
'08 F650GS (798cc)
'19 R1250RS
+ another boxer engined motorcycle and sidecar

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

valve shims for an 8valve 100 or a K75 (swap) K-dogs10
    

klompy the grey brick

klompy the grey brick
VIP
VIP
perhaps a Sydney maintenance day would be in order where we could;
check tolerance of valve settings which may allow a swap to reset the shim count....at the very least it would show if shims need to be purchased....
What do you think?


__________________________________________________
KKlompy valve shims for an 8valve 100 or a K75 (swap) 2854237993
"Grace" 1984 K100RS Silver VIN 0019026 Mitt eine Staintune Zorst.
"Olivia" 1997 K1100LT Dark Grey VIN WB1052600W0237453.









Chassis number0019026
Vehicle code0503
SeriesK589
ModelK 100 RS 83 (0502 ( 0503 )
Body typeK 100 RS 83 (0502
Catalog modelECE
Production date1984 / 07
Engine0513)

valve shims for an 8valve 100 or a K75 (swap) Au-log10


    

Rick G

Rick G
admin
admin
I have a few 255 and 250 that are excess but only 1 235. I will bring some down in sept and do some heavy wheelin and dealin.
I can post if you want then sooner.
BTW now that I have done a head reco on my K11 I may be needing some 16v buckets do you guys have any of those.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

AL-58

AL-58
Life time member
Life time member
RicK G wrote:I have a few 255 and 250 that are excess but only 1 235. I will bring some down in sept and do some heavy wheelin and dealin.
I can post if you want then sooner.
BTW now that I have done a head reco on my K11 I may be needing some 16v buckets do you guys have any of those.
Having just done the shims on my 1100 I have a few leftovers.
2.95 x 1
2.90 x 7
2.75 x 1
Speed isn't important on the others, I haven't got anybody looking for them at the moment but I've got none of those sizes (its the clubs shim kit, I just look after it). The factory kit contains 4 of each size, I topped it up a few years ago with a bunch of Yamaha XJ shims.
Looking like there could be a mini swap meet too!


__________________________________________________
'93 K1100LT
'08 F650GS (798cc)
'19 R1250RS
+ another boxer engined motorcycle and sidecar

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

valve shims for an 8valve 100 or a K75 (swap) K-dogs10
    

AL-58

AL-58
Life time member
Life time member
Klompy the grey brick wrote:perhaps a Sydney maintenance day would be in order where we could;
check tolerance of valve settings which may allow a swap to reset the shim count....at the very least it would show if shims need to be purchased....
What do you think?
That's a good idea, just have to find out who's interested. I've got the shims, the tools and a set of mercury sticks for throttle body synch. Some people might need a set of cam cover gaskets if they've hardened up too much, mine were very borderline today.
Al


__________________________________________________
'93 K1100LT
'08 F650GS (798cc)
'19 R1250RS
+ another boxer engined motorcycle and sidecar

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

valve shims for an 8valve 100 or a K75 (swap) K-dogs10
    

Waz

Waz
Life time member
Life time member
I'm very interested, would like to learn how to d shims.

    

Rick G

Rick G
admin
admin
AL-58 wrote:
RicK G wrote:I have a few 255 and 250 that are excess but only 1 235. I will bring some down in sept and do some heavy wheelin and dealin.
I can post if you want then sooner.
BTW now that I have done a head reco on my K11 I may be needing some 16v buckets do you guys have any of those.
Having just done the shims on my 1100 I have a few leftovers.
2.95 x 1
2.90 x 7
2.75 x 1
Speed isn't important on the others, I haven't got anybody looking for them at the moment but I've got none of those sizes (its the clubs shim kit, I just look after it). The factory kit contains 4 of each size, I topped it up a few years ago with a bunch of Yamaha XJ shims.
Looking like there could be a mini swap meet too!

I'll keep those in mind AL if I need any of the sizes I have all 16 from the second head and havent been through them yet.
The head I am using had all 285 or 290 in it and one was a bit iffy with some case hardening starting to flake.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

klompy the grey brick

klompy the grey brick
VIP
VIP
Yep I am up for it...so I need some gaskets "just in case"...orings too?...for the bolts...will check Motobins or Motorworks.....perhaps in a couple of weeks??? have heaps of room here and secure enough to leave stuff lying around.


__________________________________________________
KKlompy valve shims for an 8valve 100 or a K75 (swap) 2854237993
"Grace" 1984 K100RS Silver VIN 0019026 Mitt eine Staintune Zorst.
"Olivia" 1997 K1100LT Dark Grey VIN WB1052600W0237453.









Chassis number0019026
Vehicle code0503
SeriesK589
ModelK 100 RS 83 (0502 ( 0503 )
Body typeK 100 RS 83 (0502
Catalog modelECE
Production date1984 / 07
Engine0513)

valve shims for an 8valve 100 or a K75 (swap) Au-log10


    

AL-58

AL-58
Life time member
Life time member
Klompy the grey brick wrote:Yep I am up for it...so I need some gaskets "just in case"...orings too?...for the bolts...will check Motobins or Motorworks.....perhaps in a couple of weeks??? have heaps of room here and secure enough to leave stuff lying around.
2 weeks is the Casper Rally for me, but 29/30 I'm clear.
The bikes need to be cold for clearance checking so some time is required even though it's a fairly easy job. The rubber gaskets get less flexible with age so it's a maybe. Mine have sealed OK with a smear of silicon. I've had few overheating episodes which might have had some effect on the gaskets too.
Al


__________________________________________________
'93 K1100LT
'08 F650GS (798cc)
'19 R1250RS
+ another boxer engined motorcycle and sidecar

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

valve shims for an 8valve 100 or a K75 (swap) K-dogs10
    

klompy the grey brick

klompy the grey brick
VIP
VIP
lets book it in Eddie...venue optional in locality....TBA


__________________________________________________
KKlompy valve shims for an 8valve 100 or a K75 (swap) 2854237993
"Grace" 1984 K100RS Silver VIN 0019026 Mitt eine Staintune Zorst.
"Olivia" 1997 K1100LT Dark Grey VIN WB1052600W0237453.









Chassis number0019026
Vehicle code0503
SeriesK589
ModelK 100 RS 83 (0502 ( 0503 )
Body typeK 100 RS 83 (0502
Catalog modelECE
Production date1984 / 07
Engine0513)

valve shims for an 8valve 100 or a K75 (swap) Au-log10


    

gpguyer

gpguyer
active member
active member
Klompy let me know when and I will try and get down.

Gordo.

    

AL-58

AL-58
Life time member
Life time member
I have many 2.55 and 2.65 shims, will swap for almost anything.

I desperately need some 2.60 shims(have none left), also need to top up 2.25, 2.3, 2.35, 2.4(one left in the kit)


Time for another valve clearance day?  Sydney or Hunter?

Al


__________________________________________________
'93 K1100LT
'08 F650GS (798cc)
'19 R1250RS
+ another boxer engined motorcycle and sidecar

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

valve shims for an 8valve 100 or a K75 (swap) K-dogs10
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Special tools and jigs » valve shims for an 8valve 100 or a K75 (swap)

Permissions in this forum:
You cannot reply to topics in this forum