Hi all have just purchased some parts from one of our members and am looking for some extra bits so I can fit them, the item is a set of front crash bars which I realise have limited use in a real crash but is a handy piece of gear to hang stuff off of.
the bits I need are arrowed below 2x big silver bolts and 2 x rubber mounting posts.


thanks guys

Mine came in real handy when I went down in the mud a while ago they saved what would have been a lot of fairing damage.
I will have a hunt through all my bits Klompy and see if there are some of those bolts and I can give you a lead on rubbers of a different nature but they do the job http://www.bareco.com.au/files-general-g21e I have the 8mm ones on my K1100 and they work just fine, they have been tested.
If you cant find a dealer then I can get some localy and send them down.

Thanks Rick got some from GWS at Windsor at$13 each and look great just need to find the big bolts normally fitted to everyone's bike but mine.

I will get back by this evening I have been in the shed all day doing leakdown etc will get to look soon.

Thanks rick

Sorry for the bad news mate but I haven't got any. I got plenty of the normal bolts well 1 set but no chash bar bolts.

no probs will find some somewhere...thats the fun bit ....the hunt begins....

Klompy the grey brick wrote:no probs will find some somewhere...thats the fun bit ....the hunt begins....

I have a pair of the mounting bolts with the rubber mounts in good condition on my 1100 wreck. As the bike won't be going back on the road I'm prepared to swap for the normal ones if you're interested (I still need bolts to hold the motor in at this stage).
I'm in Mt Riverview near Blaxland.
Al

thanks mate looks like you will be getting a visitor....will PM you...

You can get the crash bar mounts and many other things new from Munich Motorcycles in Perth. Its a great site I get alot of things through them and most times overnight or at least in a couple of days.

@ gpguyer...you do know about moto-bins, Motorworks and james sherlock over in the UK?

Takes a couple of weeks to get here, but it can work out cheaper than Munich Motorcycles.

Thanks for the heads up I will look them up.