BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Oil Caddy Build Empty Oil Caddy Build Thu Feb 27, 2014 12:08 pm

Shoganai

Shoganai
Silver member
Silver member
Well the reason I couldn't find the pictures of this mini project was that in my rush to get the bike ready, I didn't take any.

Here is the oil caddy I built.

I bought two of these. Powermadd Polaris GEN II Chassis Oil Caddy.
(Well the actual ones I bought did not have that large side plate and did have the black bungee strap to hold the oil in the caddy.)

Oil Caddy Build Oil%20Caddy-XL

This is the exact one I bought. PowerMadd 74805 Spare Oil Storage for Polaris Gen II

Oil Caddy Build Oil%20Caddy%203

And a bar of 1" x 4" aluminum stock.

I mount it in place of the right rear foot peg and was able to use the OEM bolt. I put it there for two reasons. One, it was closest to the oil fill on the K11 and two, I didn't give up any premium storage location.

Oil Caddy Build DSCF1149-XL

Oil Caddy Build DSCF1149%20-%201-X2

Oil Caddy Build DSCF1152%20-%201-X2

Oil Caddy Build DSCF1151-X2

Oil Caddy Build DSCF1152-X2

Oil Caddy Build DSCF1154-X2

Oil Caddy Build Oil%20Caddy%202-XL

Oil Caddy Build DSCF1149%20-%202-XL

It worked perfectly!
.

    

2Back to top Go down   Oil Caddy Build Empty Re: Oil Caddy Build Thu Feb 27, 2014 12:33 pm

duck

duck
Life time member
Life time member
Yer crazy!

You might want to consider using short bolts for F.  If you use one that's too long the rear one might scratch the FD.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

3Back to top Go down   Oil Caddy Build Empty Re: Oil Caddy Build Thu Feb 27, 2014 1:06 pm

Shoganai

Shoganai
Silver member
Silver member
Scratch the FD!?  Oil Caddy Build 44271

    

4Back to top Go down   Oil Caddy Build Empty Re: Oil Caddy Build Thu Feb 27, 2014 1:36 pm

duck

duck
Life time member
Life time member
I meant swing arm.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

5Back to top Go down   Oil Caddy Build Empty Re: Oil Caddy Build Thu Feb 27, 2014 1:41 pm

Shoganai

Shoganai
Silver member
Silver member
I knew what you meant, I was just giving you a hard time sweetie.

(F) are the OEM bolts to my knowledge and nothing moves or flexes with that assembly.
I could go with shorter ones just to clean it up though.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum