Gheez, let me finish my Saturday morning coffeeeeeeee....
OK let's go!
A) Original cover used. Blue dots (rubber plugs) on right side something I had laying around.
BONUS: One can ream out the hole on a dual power accessory bracket for use with standard automotive plugs.
B) Using a grinder I removed the rivets on the original coils to use the coil cover mounting brackets. This setup allows only the left side brackets to be used.
A homemade bracket from leftover parts after a bathroom sink repair cut and used to connect coils.
C) Parts I cut and used to make bracket.
D) Bottom View showing wires soldering inward.
E) Rearview showing mounting setup.
Installed last autumn before the winter snows and 200 miles ago, so far flawless performance. Great cold starts at freezing temperatures. While you are at it, now is a good time to remove the fuel tank and clean all the electrical connections.