BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Rear hub cap Empty Rear hub cap Fri Jul 06, 2012 9:13 am

captaink

captaink
Silver member
Silver member
I've acquired a rear hub cap for my bike

Rear hub cap Imag0334

How do i fit it to my wheel?

Rear hub cap Imag0335


Or is it the wrong one........


__________________________________________________
1989 k 100rs
    

2Back to top Go down   Rear hub cap Empty Re: Rear hub cap Fri Jul 06, 2012 9:44 am

Rick G

Rick G
admin
admin
It will fit, the two tangs in the centre of the cap fit inside the cylindrical bit that is held on by the centre bolt, you may need to "adjust it" by opening the tangs out a bit. But be warned they do have a habit of committing suiside on the motorway and usualy in front of a big truck.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Rear hub cap Empty Re: Rear hub cap Fri Jul 06, 2012 9:54 am

captaink

captaink
Silver member
Silver member
Thanks Rick will attempt to "adjust it"


__________________________________________________
1989 k 100rs
    

4Back to top Go down   Rear hub cap Empty Rear Hub Cap Fri Jul 06, 2012 12:15 pm

Lazyboy

Lazyboy
Silver member
Silver member
The hub cap goes on quite easily as explained by Rick G. Over the years I have been sticking a very small thin thread of good old Prestik along the edge of the hub cap that rests on the rim and it sticks very well without being hard to pull off and have never lost a hub cap.


__________________________________________________
1984 BMW K100RT

Bikes Name: Lazyboy
    

5Back to top Go down   Rear hub cap Empty Re: Rear hub cap Fri Jul 06, 2012 1:04 pm

Inge K.

Inge K.
VIP
VIP
Looks like you got a cap to the K75 three spoke wheel.

K75`s using four bolts on the rear wheel.
K100 4V and K11`s using five bolts.

And because of that it`s different length on the tangs.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

6Back to top Go down   Rear hub cap Empty Re: Rear hub cap Sat Jul 07, 2012 5:36 am

ReneZ

ReneZ
Life time member
Life time member
Same is used for the older K100's - no centre bolt.


__________________________________________________
Greetings from Florida Australia! Having a 'new' K     Surprised-o: 

Rene


BMW K100 - 1985 (0030029) Scotland Rear hub cap Rain
BMW K1200GT - 2003 (ZK01223) Florida
BMW K1200GT - 2004 (ZK27240) Australia
    

7Back to top Go down   Rear hub cap Empty Re: Rear hub cap Sat Jul 07, 2012 3:37 pm

Inge K.

Inge K.
VIP
VIP
Yes Rene, all monolevers use only four bolts.......
but the hub cover is different on a three spoke than a Y-spoke.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

8Back to top Go down   Rear hub cap Empty Re: Rear hub cap Sat Jul 07, 2012 7:24 pm

charlie99

charlie99
VIP
VIP
yep confirmed ...still looking for one


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

9Back to top Go down   Rear hub cap Empty Re: Rear hub cap Mon Jul 09, 2012 5:45 am

captaink

captaink
Silver member
Silver member
I've just measured the cap i have - 53mm length tangs, the one I apparently need is 33mm.

I figured that this will be about right, it stuck out about that much when I tried to fit it.

It'll be tomorrow before it arrives, so I've got a little time to clean the rear wheel to make it the same colour as the newish cap. Laughing


__________________________________________________
1989 k 100rs
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum