1 the watches are well lit Tue Apr 03, 2012 4:49 am
komandoalicante
Silver member
Well some of you already know my mania to make the watches are well lit
This is a simple and cheap
We did a system concept of this but with blue LEDs were not very good.
The diodes and resistors have cost € 3.45 and also we must shrink sleeves in my case of 2 diameters
Note that the diodes have the longest polarity is negative
The first case (left) isolates the terminal of the diode and resistance, then we put a cover and isolate the other diode terminal taking it back, then we put the other case we weld the diode resistance and isolate the remaining aa sight.
I have passed under the wire by passing it through the hole, so when goals faston connector cable firmly subject, so installation is very easy to undo.
I have soldered the negative terminal of the diode to the chassis and so put him to ground and clamping circuit that does not move.
This is a simple and cheap
We did a system concept of this but with blue LEDs were not very good.
The diodes and resistors have cost € 3.45 and also we must shrink sleeves in my case of 2 diameters
Note that the diodes have the longest polarity is negative
The first case (left) isolates the terminal of the diode and resistance, then we put a cover and isolate the other diode terminal taking it back, then we put the other case we weld the diode resistance and isolate the remaining aa sight.
I have passed under the wire by passing it through the hole, so when goals faston connector cable firmly subject, so installation is very easy to undo.
I have soldered the negative terminal of the diode to the chassis and so put him to ground and clamping circuit that does not move.
__________________________________________________
SAK3 and komandoalicante is the same person
In March we made a International meeting KEDADA ALICANTE of BMW motorcycle K in Spain.
The last meeeting March 2020
https://youtu.be/hfqxlGeEVsY