Bueno algunos de vosotros ya conoceis mi mania de hacer que los relojes esten bien iluminados

Este es un montaje sencillo y barato

Los relojes son de J2G2K100 que ya le hicimos una intalación de estas pero con diodos azules y no quedaban muy bien.




Los diodos y las resistencias han costado 3.45 € y tambien hemos de tener fundas termoretractiles en mi caso de 2 diametros

Tener en cuenta que los diodos tienen polaridad el más largo es el negativo















La primera funda (izquierda) aísla el terminal del diodo y la resistencia, luego metemos una funda y aislamos el terminal del otro diodo retrayéndola, y después metemos la otra funda soldamos el diodo con la resistencia y aislamos lo que quede a a la vista.













Yo he pasado el cable por bajo pasandolo por el agujero, así cuando metas el conector fastón sujetara fuertemente el cable, de esta forma la instalación es muy fácil de deshacer. 



Yo he soldado el terminal negativo del diodo al chasis y asi consigo tensión y sujección para que no se mueva.

Babelfish translate isn't always your friend! But you always get the pictures...


Good some of you already conoceis my mania for doing that the clocks
esten well illuminated

This it is a simple assembly and cheap

The clocks are of J2G2K100 that already we did a intalación to him of
these but with blue diodes and were not very well.




The diodes and the 3,45 resistance have cost € and also we have to have
termoretractiles covers in my case of 2 diameters

To consider that the diodes have the longest polarity is the negative















The first cover (left) isolates the terminal of the diode and the
resistance, soon we put a cover and we isolated the terminal of the
other diode dissuading it, and later we put the other cover we welded
the diode with the resistance and isolated what it is to at sight.













I have passed the cable through low passing it through the hole, thus
when I put the connector fastón held the cable strongly, of this form
the installation is very easy to undo.



I have welded to the negative terminal of the diode to the chassis and
thus with himself tension and attachment so that she does not move.

great result komando .... thanks for posting

perhaps a little silicon might hold those leds in place a little longer ?

Guest in the House wrote:Babelfish translate isn't always your friend! But you always get the pictures...

Komandoalicante also did send a identical post two days ago, with english text.

Inge K.

Inge K. wrote:
Komandoalicante also did send a identical post two days ago, with english text.

Inge K.

It is true

I apologize

there any way to delete one of the two post

I appreciate the dual language post. Frankly, Babblefish sometimes makes the "translation" difficult to understand. From time to time I use Babblefish when I am on the German EBay and the results can be mystifying, and at other times very funny.