BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Seen this? Weld-on repair for 16 and 20 teeth splines

View previous topic View next topic Go down  Message [Page 1 of 1]

blaKey

avatar
Life time member
Life time member
Have a look at the Munich Motorcycles web site...


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

RT

RT
Life time member
Life time member
Hhhmmm thats interesting wonder how hard that is to get put on.
Tks Blakey
RT

    

robinm

robinm
Silver member
Silver member
motobins in the UK also do these, well in 20 spline anyway. I have used them a couple of times. Any half good engineer can fit them to your old drive shaft.

    

pjjms

avatar
Silver member
Silver member
Any drive shaft/CV joint repair shop should have a lathe set up just for welding and will be able to fit these.

    

robmack

robmack
Life time member
Life time member
I just shipped off my drive shaft to Bruno's in Canada to have his version of this spline attached (to replace my worn OEM spline). Not too expensive to get done -- under $180.

P.S. Munich Motorcycles has insane prices. Is that normal Down Under?


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

Rick G

Rick G
admin
admin
robmack wrote:I just shipped off my drive shaft to Bruno's in Canada to have his version of this spline attached (to replace my worn OEM spline). Not too expensive to get done -- under $180.

P.S. Munich Motorcycles has insane prices. Is that normal Down Under?

They are the best in Australia you should see the real expensive ones. Morgan & Wacker $600 for a cam chain kit for my K1100 and Munich is $440 and Motobins in UK was $130 delivered to my mailbox.
They are all screaming thier guts out about us shopping overseas, gee I feel real sorry for them Seen this? Weld-on repair for 16 and 20 teeth splines 44271


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

zonenfeile

zonenfeile
Gold member
Gold member
Morgan & Wacker $600 for a cam chain kit for my K1100

strange pricing

a complete new BMW original 16v / K1100 cam = 375 € - bought last year in Hamburg

here we have sometimes made bad experience with reanimation of the paralever camshafts - even when repaird by profi companys like Uni-Cardan.

I´d take a new one for the next 150.000 km


__________________________________________________
ex K1100/2

K- Wiki - or rtfm first

Regards from Hamburg

Olaf
    

hot_seat

hot_seat
active member
active member
i have just a couple of weeks ago finished installing a drive shaft that i got a 20 tooth stub ,machined off the old worn spline and welded in the new stub ,unfortnatly the male spline was stuffed also so got a new rear drive from fleabay USA (Tampa chop shop) good service and delivery cost me $50 for the complete drive + $75 p&p good deal they have a good selection

    

hot_seat

hot_seat
active member
active member
Got the stub spline from motorbins UK

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Seen this? Weld-on repair for 16 and 20 teeth splines

Permissions in this forum:
You cannot reply to topics in this forum