1 Is there something missing here?? Fri Sep 23, 2011 7:38 am
Agerbundsen
Silver member
The silencer inlet has a "lump", which extends under the frame to the RH side. There are lugs with bolt holes both on the "lump" and on the frame - but they are about 15 mm apart, but otherwise line up - sorta.
Should there be a connection between the two? and if so, with a rubber bumper between?
I surmize that the "lump" is an expansion chamber to suppress some pressure peaks in the exhaust??
Should there be a connection between the two? and if so, with a rubber bumper between?
I surmize that the "lump" is an expansion chamber to suppress some pressure peaks in the exhaust??