BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   The side stand mechanism. Empty The side stand mechanism. Mon Oct 07, 2024 2:39 pm

Skidmark

Skidmark
active member
active member
Just removed the side car body and gone to refit the center and side stand and I found a hanging linkage, it's connected the clutch as it moves slightly when I operate the clutch lever.

I'm missing the springs and not sure about this hanging underneath.

How does it re attach or should I delete it?

Cheers 
Mark

    

2Back to top Go down   The side stand mechanism. Empty Re: The side stand mechanism. Mon Oct 07, 2024 3:57 pm

Laitch

Laitch
Life time member
Life time member
Skidmark wrote:Just removed the side car body and gone to refit the center and side stand and I found a hanging linkage, it's connected the clutch as it moves slightly when I operate the clutch lever.
How does it re attach or should I delete it?
It's part of a safety feature. When properly adjusted, it retracts the side stand when the clutch hand lever is pulled. Free will allows you to delete it. I have mine adjusted but I usually kick up the stand without using it.

Start video at 3:58.


__________________________________________________
1995 K75 90,000 miles
    

3Back to top Go down   The side stand mechanism. Empty Re: The side stand mechanism. Wed Oct 09, 2024 7:29 pm

Skidmark

Skidmark
active member
active member
Searching through a few posts it seems a k1200rs center and sidestand fill fit on the original k100 center mount, could you 100 percent confirm this and I'll go ahead and buy one.
Many thanks

    

4Back to top Go down   The side stand mechanism. Empty Re: The side stand mechanism. Thu Oct 10, 2024 8:51 am

Laitch

Laitch
Life time member
Life time member
Is this one of the post's you have read?


__________________________________________________
1995 K75 90,000 miles
    

5Back to top Go down   The side stand mechanism. Empty Re: The side stand mechanism. Thu Oct 10, 2024 9:07 am

Dai

Dai
Life time member
Life time member
In the end I nabbed a cheap early style K100 assembly off ebay, so I've no idea what the extent of the fixerupper would have been. To summarise TWB's post; 

- the K1200 mounting plate will NOT fit the K100 gearbox
- you can fit the K1200 stand to the K100 mounting plate
- BUT the K1200 stand is 20mm or so shorter than the K100 stand.

So... really you need another K100 or K1100 stand.



Last edited by Dai on Thu Oct 10, 2024 9:11 am; edited 1 time in total


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

6Back to top Go down   The side stand mechanism. Empty Re: The side stand mechanism. Thu Oct 10, 2024 9:11 am

92KK 84WW Olaf

avatar
Life time member
Life time member
I have put complete K1100 stand assemblies on my K100RS RT and Sprint.

As far as I am aware but not certain the K1200 transmission uses the same stand mounts.

EDIT: Dai has confirmed they do not.!


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum