BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Fitting a Moronic to a 2v K100 Empty Fitting a Moronic to a 2v K100 Wed Jun 29, 2016 7:02 pm

Dai

Dai
Life time member
Life time member
I guess this is mostly aimed at Motorcycle Mike as I know he's done this, but advice welcomed from all quarters. Why do I want to do this? Because I'm an inveterate fiddler. Apart from the Motronic unit itself, what else would I need (wiring loom isn't a problem)? There's a K1100 unit on ebay.uk ATM that I'm watching. Would the K1100 unit be suitable?


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

2Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 12:57 am

duck

duck
Life time member
Life time member
Not sure about the UK but all US K1100s have a cat and corresponding O2 sensor in the exhaust. I don't know enough about cats to know if that would be an issue or not though.

I think the water temp sensor is different but that should be easy to deal with.

The k1100s don't have a mass airflow unit but do have an air temp sensor.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

3Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 1:41 am

Rick G

Rick G
admin
admin
I remember Inge saying that there are two motronic units one for the cat and one for the CO2 adjustment and they had different coloured labels.
Personally I would say the cat is the way to go but considering Europe got the same models as Australia there wont be many around with cats.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

4Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 1:52 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
The threads on the water temperature sensor are different so you'll need a K11 'spigot' (at the front of the engine, top, left hand side) and a different radiator hose due to the bend. I'm using later (10/93 on) Motronic 2.2 with an oxy sensor but no catalyst, no dramas, on my hybrid. There are three different Motronic 2.1 brains: with and w/o catalyst & with catalyst and O2 sensor, as well as the rarer manual C0 adjustment, and two later Motronic 2.2 as they all had cats and O2 sensors by then but there are two part numbers, plus their supersessions.

I reckon it can be done with a bit of time and access to the part variations.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

5Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 1:56 am

charlie99

charlie99
VIP
VIP
worth investigating at least dai

I also had a thought about that recently and think I could get by with a minor loom I recon ...whatever goes to the motronic  in addition to the standard k100 loom ...just splice the bits in and rewrap ?
 k1100 throttle bodies for the tps on the end .as the k100 coupling is just slightly different ..plus the injector minor loom ,

hmm what else is there ?

brakes, instruments and lighting could stay the same ?

more thoughts required ?


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

6Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 2:09 am

Rick G

Rick G
admin
admin
I would like to use the moronic on the K75s but seeing as the ignition is intergral with the ECU its a bit difficult.
Olaf was saying in another thread that the Volvo 300 series ECU had the same basch part number as the K100 L Jet so a thought occured (a rare thing these days) that maybe there is somewhere a six cylinder moronic that might be adaptable.
Food for thought.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

7Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 2:14 am

charlie99

charlie99
VIP
VIP
yeah I guess rick

the injector and coil timings should mate up well with the k75 ....not sure about the hall effect position - timing though  but a bit of research ...or a car in a wreckers could help with the details ?


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

8Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 6:55 am

Dai

Dai
Life time member
Life time member
I'm already running K1100 throttlebodies so I do have the relevant TPS (somewhere).

TWB: I don't understand why I'd need to change the temperature sensor. Does the Motronic one have a different curve? As I understand what you're saying, a late 2.2 with oxy sensor would be the one to go for, but I'd need to weld a sensor mounting point into the exhaust system. Into an exhaust pipe or into the silencer where it would get an overall view of the exhaust gases?

I was originally thinking of 'converting' Brick 2 but circumstances dictate that it and the Bandit will be up for sale as soon as Brick 2 is finished. I want that Falcone. However, once the Falcone arrives LFB will be available for fiddling with, so it also won't stop me doing some preparation.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

9Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 7:12 am

Rick G

Rick G
admin
admin
The temp sensor has only one sensor  and the K100 sensor will give double the resistance that is required.
It works from one pin to the other not 2 sensors to ground in the same housing.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

10Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 7:59 am

Dai

Dai
Life time member
Life time member
Thanks Rick.

Can anyone identify the version of this, supposedly off a 1999 K1100LT:

http://www.ebay.co.uk/itm/272289355102?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

I asked Motorworks but for the first time ever the numbers on the label had them beat.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

11Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 9:39 am

Holister

Holister
Life time member
Life time member
Working out what that last number is was the trick... its a nine.

According to realoem 1361 7651599 (2.2) was used from 08/98 to 04/99 on K1100LT authorities model without catalytic converter and is fully suppressed.


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808
 Fitting a Moronic to a 2v K100 Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

12Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 12:07 pm

Dai

Dai
Life time member
Life time member
THANK YOU!!!!! If you'll pardon the pun, I hadn't figured that last digit to be a nine. Okay, seems like I need to bid on it.

Charlie - both LFB and Brick2 have custom looms on where the FICU and ICU sub-looms are completely seperate from the main loom. That, in theory, gives me the option of returning to the AFM setup with minimum fuss if it all goes TITSUP (Totally Incapable To Support Usual Performance).


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

13Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 2:39 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Kaptain has it right, with the additional info that it superseded from a number that streches back through '95 (1 464 811). I'd say the eBay offering is the one to use, and inexpensive too! Drill a hole and weld in a bung for an O2 sensor and you'll be laughing.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

14Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 3:38 pm

Dai

Dai
Life time member
Life time member
Two Wheels Better wrote:Drill a hole and weld in a bung for an O2 sensor and you'll be laughing.
Drill the hole where? Exhaust no.1 would be the easy option but does it need to be in the silencer to read all of the gas flow?


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

15Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 4:08 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
On my Big Block I used Kiwi Malcolm's collector. That's where we drilled and welded the bung, so it gets all four pot's exhaust fumes to sniff on. Does it need all four? My guess is that it's a better reading of the temperature, but how scientific do we need to be?


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

16Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 4:56 pm

Inge K.

Inge K.
VIP
VIP
As that Motronic unit on Ebay is for non cat models a O2 sensor isn't used.
But you gonna need the pot meter which is on non cat models for adjusting the CO.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

17Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 5:11 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
I have the 'pot', Dai, if you need it, no charge. I'm not gunna use it. Lemme know. Look on that harness for the connector. The US looms didn't have it.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

18Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 6:06 pm

Dai

Dai
Life time member
Life time member
Thanks guys. It looks like this project will be a 'go' if I get the unit. I've put a reasonably high bid on it and I'm quite willing to go to about half of what Motorworks want for a secondhand one.

I love fiddling. Very Happy


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

19Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jun 30, 2016 7:09 pm

Ringfad

Ringfad
Life time member
Life time member
Hi Dai that seller is very close to you so might be worth collecting if successful. He breaks a lot of ex police bikes. I have bought a few things from him.

If your 2.2 project fails I have several 2.1 units and you can have one if you want.


__________________________________________________
Fitting a Moronic to a 2v K100 Ir-log10

 ;BMW; K1 Black 1993 60K Km     ;BMW;  K1100RS Black 1996       ;BMW; K1 Blue 1990 25K Miles

 ;BMW; K1200RS Red
    

20Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Fri Jul 01, 2016 4:48 am

charlie99

charlie99
VIP
VIP
that's an amazing price dai

what do you think that it will get ? 

far too many good bits ...and bikes over there to drool over with amazingly cheap prices


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

21Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Fri Jul 01, 2016 6:31 am

Dai

Dai
Life time member
Life time member
charlie99 wrote:that's an amazing price dai

what do you think that it will get ? 

far too many good bits ...and bikes over there to drool over with amazingly cheap prices

I've no idea. The auction expires next Tuesday and unless an item is genuinely super-rare, mid-week early-afternoon auctions tend to go for (relatively) low prices.

Ringfad wrote:that seller is very close to you so might be worth collecting if successful. He breaks a lot of ex police bikes. I have bought a few things from him.

If your 2.2 project fails I have several 2.1 units and you can have one if you want.

I'll definately keep that in mind! Craigavon is a bit out of my way in that it means crossing a lot of urban jungle, so I'll pay the postage if I win it. Useful info that he breaks police bikes though.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

22Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Tue Jul 05, 2016 1:15 pm

Dai

Dai
Life time member
Life time member
I got the unit for £22.65 inc P&P. TWB - I think I have a CO adjuster somewhere from when I stripped a K100LT wiring loom for parts. It fits under the relay box, IIRC? I'll get back to you if I can't find it.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

23Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Tue Jul 05, 2016 2:09 pm

duck

duck
Life time member
Life time member
It mounts to the hold-down plate for the battery from a K1, K100RS4V or 93- K1100.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

24Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Tue Jul 05, 2016 3:39 pm

Dai

Dai
Life time member
Life time member
Thanks Duck. That explains why it was held on with two self-tappers - not very BMW-like.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

25Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Tue Jul 05, 2016 5:49 pm

Motorbike Mike

Motorbike Mike
Life time member
Life time member
Hi Dai,
Sorry for the late reply, I've been over to Spa with the Flying Brick.
I've got both 2.2 and 2.1 Motronic sets but I'm on a 2.1 off a K100 16v. Don't worry about TPS as they fit it to everything  http://www.realoem.com/bmw/enUS/part?id=0526-EUR-06-1996-89V2-BMW-K_1100_LT_0526,_0536_&mg=13&sg=54&diagId=13_0522&q=13631461852

I'm going to try the 2.2 set to my K as I have an intermittent cut out issue coming back off a closed throttle for a long time e.g going round a long hairpin on a track. I've tried all the earths and cleaned all plugs but no change so I'm going for a swap.

Temp sensor is different on the 16v 11 & 12's so you'll need to swap that over.
http://www.realoem.com/bmw/enUS/part?id=0526-EUR-06-1996-89V2-BMW-K_1100_LT_0526,_0536_&mg=17&sg=12&diagId=17_0629&q=12611341602

One thing I must mention. The fuelling is not right for an 8v engine. I had my bike on a dyno last year and it was all over the place. I originally fitted the 2.1 to allow a BMW map specialist to remap to suit but when it came to it he didn't want to take it on-thanks mate!

If you look on the partial graph below from my dyno run you'll see that the fuelling is all over the place and should sit between the red upper and green lower limit lines-it clearly doesn't. Unless you can get someone with an eprom reader and a dyno, you're stuck. If you find someone let us all know!

Fitting a Moronic to a 2v K100 Cimg3427

I've got a breathed on 1100 this year so I'm back in the game.

Good luck.

    

26Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Tue Jul 05, 2016 6:04 pm

Motorbike Mike

Motorbike Mike
Life time member
Life time member
I've just found this list for the K100 16v and is seems that all 16v water temp sensors from 100 to last 1100 are compatible-even some cars.

http://www.realoem.com/bmw/enUS/part?id=0523-EUR-03-1991-89V1-BMW-K_100_RS_0523,0533_&mg=17&sg=12&diagId=17_0628&q=13622242184

    

27Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Wed Jul 06, 2016 6:05 am

Holister

Holister
Life time member
Life time member
Motorbike Mike wrote:
.......
I'm going to try the 2.2 set to my K as I have an intermittent cut out issue coming back off a closed throttle for a long time e.g going round a long hairpin on a track. I've tried all the earths and cleaned all plugs but no change so I'm going for a swap.
.......
Mike, I had same problem a couple of years back which was resolved. Three of my exhaust valves were way too tight which meant they were not closing completely. Roll the throttle off and clutch in, and the engine would die. My wildly eratic fuel consumption would equate to your eratic dyno results
Read a summary and the solution in this post


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808
 Fitting a Moronic to a 2v K100 Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

28Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Wed Jul 06, 2016 9:50 am

Motorbike Mike

Motorbike Mike
Life time member
Life time member
I still think that my problems are electrical. Once the motor is dead it won't come back off the throttle, I have to kill the system with the kill switch and it will run again. Different ECU's and batteries make no improvement so the search continues.
Thanks for the tip anyway.

    

29Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Wed Jan 04, 2023 5:47 pm

Ringfad

Ringfad
Life time member
Life time member
"According to realoem 1361 7651599 (2.2) was used from 08/98 to 04/99 on K1100LT authorities model without catalytic converter and is fully suppressed"


Dai passed me this Motronic a few years ago and it sat in my shed. Now that I have a K1100RS I thought I would check if it works. Doing a google search on the part number I found this old thread. My K1100RS is a 96 Non Cat model with Motronic part number 1361 1464710 fitted.


It appears it is modified to work with the early small gear water/oil pump which were fitted to Police bikes.


I opened it up to discover the only difference to the 2.2 Motronic fitted to my bike was the Eprom.


I copied my chip and fitted it to Dai's unit. It brought me to Stradbally last week (approx 160km) and I can see no difference in performance to the original one. Thanks Dai - I now have a working spare Smile


__________________________________________________
Fitting a Moronic to a 2v K100 Ir-log10

 ;BMW; K1 Black 1993 60K Km     ;BMW;  K1100RS Black 1996       ;BMW; K1 Blue 1990 25K Miles

 ;BMW; K1200RS Red
    

30Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Thu Jan 05, 2023 7:32 am

Dai

Dai
Life time member
Life time member
Ah - good! I was a bit disappointed when Mike explained the fueling problem but better to know before I started throwing parts all round the garage rather than afterwards.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

31Back to top Go down   Fitting a Moronic to a 2v K100 Empty Re: Fitting a Moronic to a 2v K100 Mon Jun 19, 2023 8:55 am

tinyspuds

tinyspuds
Life time member
Life time member
Just to add to a comment earlier on this thread. It isn’t entirely necessary to switch to 1100 TBs, I have recently seen someone stick with the K100s and mount a 16v TPS to a slotted backing plate to gain the required TPS orientation.


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106.
1986 K100RS in boxes. VIN 0141918.
1954 Royal Enfield 350 Bullet. Original.
2000 Hayabusa with Charnwood chair, Wasp forks and EZS wheels.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum