BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Does K100 Ignition coil cover fit to K1100?

View previous topic View next topic Go down  Message [Page 1 of 1]

Saints

Saints
active member
active member
Hi,

Has anyone experience that is K100 ignition coil cover plug and play type of solution with K1100? Or are the coils/and/or mounts different size Question

    

duck

duck
Life time member
Life time member
I know that you can put the two piece coil cover from a K1100 on a K100 so the horizontal hole spacing is the same. Not sure about the vertical hole spacing.

I put the K1100 one on my K100 since it's easier to use the power socket(s) for heated gear. I added a ceramic coated plate to cover the middle of the coils.

Does K100 Ignition coil cover fit to K1100? TzNYaYl


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Arlina

Arlina
Moderator
Moderator
Saints wrote:Hi,

Has anyone experience that is K100 ignition coil cover plug and play type of solution with K1100? Or are the coils/and/or mounts different size Question

Fits, but don't forget to take the mounting points of the K100 coils->cover.


__________________________________________________
Does K100 Ignition coil cover fit to K1100? Eu-log10  K1100RS/LT - R1200RT - R1100RS - Cagiva SST 350 Ala Verde - K75LT project - K75 Schurgers - K75S - K1100RS - K75RT - K75C
    

Saints

Saints
active member
active member
Thanks, i will proceed to order then!

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Does K100 Ignition coil cover fit to K1100?

Permissions in this forum:
You cannot reply to topics in this forum