Hello, would someone be so kind as to tell me what model this belly pan belongs to?








Thanks!

That'd be anyone's best guess. This is an aftermarket belly pan, not something sold originally by BMW.

It certainly "looks" like it would fit a brick engine. It would obviously need a mounting kit to fit it. And speaking to that, the mounting holes in the belly pan are much lower than the stock BMW belly pan (assuming a brick engine of course) or my Flat Racer aftermarket one which fits like OEM unit. It does appear to have cutouts in front LH and RH corners for cam cover and rad hose respectively, although it doesn't have the cutout along the LH rear for the 4 header pipes, so wondering if this unit is slightly wider.

There is a small panel on the RH side that is retained by a screw. This appears to be around the area where one would view the oil level sight glass.

The left and right rear mounting arms appear to have double-sided tape on them. Does it also hang somewhere?

I'm curious to know what this fits.

I suspect that it isn't for a K bike.  It is too symmetrical and the vertical parts at the rear don't look like they are intended to fit the K engine crank and valve covers.

Looks like it's gonna fit under the 2V RS fairing

No. I've got two 2V belly pans hanging up and there's no way that one will fit. My guess - FWIW - is that is off a Pan European or similar.

Looking at the RHS picture, there is no hole provisioned for the oil level sight glass and the holes made for the crash bars are in the wrong places.  This is not a belly pan made for a K series.

One way to solve the riddle, just fit it under a K  

In my downtime I went for a wander in the garden of the Google gods looking at piccies of various Japanese & Italian sport-touring motos. None, in any engine config, had a pan that quite resembles this one. I'm in agreement with Arlina. Chuck it up under something K and see how the undies fit.

Looks like it's for an 8 valve K100RS.  I just stumbled across this eBay listing.  It is a TCP belly pan.  Check the photo of the installation instructions.  Kind of neat feature is that you don't need to remove it to do an oil and filter change.

https://www.ebay.com/itm/275467575000?hash=item4023259ed8:g:iUAAAOSwOGtjKMgh&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337848011&customid=&toolid=10001&mkevt=1

Well, whaddyaknow!!!!

Point-Seven-five wrote:Looks like it's for an 8 valve K100RS.  I just stumbled across this eBay listing.  It is a TCP belly pan.  Check the photo of the installation instructions.  Kind of neat feature is that you don't need to remove it to do an oil and filter change.

https://www.ebay.com/itm/275467575000?hash=item4023259ed8:g:iUAAAOSwOGtjKMgh&mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5337848011&customid=&toolid=10001&mkevt=1

There you go! New one at that.

All the way Richy, all the way......

I have one in the shed  its fits the  8v k100 rs